標準編號:	GB/T 16716.1-2008
中文名稱:	包裝與包裝廢棄物 第1部分：處理和利用通則
英文名稱:	Packaging and packaging waste - Part 1：General rules of disposal and utilization
中標分類:	A80    標志、包裝、運輸、貯存綜合
行業分類:	GB    國家標準
ICS分類:	55.020 55.020    貨物的包裝和調運綜合 55.020
發布機構:	國家標準局
發布日期:	2008-07-18
實施日期:	2009-1-1
標準狀態:	superseded
被新標準替代:	GB/T 16716.1-2018 包裝與環境 第1部分：通則
被替代日期:	2018-12-28
替代舊標準:	GB/T 16716-1996 包裝廢棄物的處理與利用 通則
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	240.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 16716 specifies the disposal and utilization requirements, methods, effect evaluation criteria and recycling marking for packaging and packaging waste. This part is applicable to the design, production, application, disposal and utilization of packaging, but not applicable to hazardous goods packaging. 2 Normative References The following normative documents contain provisions which, through reference in this part of GB/T 16716, constitute provisions of this part. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 4122.1 Packaging terms - Part 1: Basic GB 16297 Comprehensive Emission Standard of Air Pollutants GB 16889 Standard for Pollution Control on the Landfill Site of Municipal Solid Waste GB 18455 Package Recycling Marking GB 18484 Pollution Control Standard for Hazardous Wastes Incineration GB 18485 Standard for Pollution Control on the Municipal Solid Waste Incineration GB 18599 Standard for Pollution on the Storage and Disposal Site for General Industrial Solid Wastes GB/T 18772 Technical Requirement for Environmental Monitor on Sanitary Landfill Site of Domestic Refuse 3 Terms and Definitions For purpose of this part, the terms and definitions established in GB/T 4122.1 as well as the following ones apply. 3.1 packaging waste any packaging container, material or component that lost or completed its intended use value or function for solid waste 3.2 reuse any business operation by which packaging which has been conceived and designed to accomplish within its life cycle a limited number of trips or rotations

Foreword i Introduction iii 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Methods 6 Effect Evaluation Criteria 7 Package Recycling Marking