標準編號:	GB/T 16778-2009
中文名稱:	纖維增強塑料結構件失效分析一般程序
英文名稱:	General procedure of failure analysis for fiber reinforced plastic structural products
中標分類:	Q23    纖維增強復合材料
行業分類:	GB    國家標準
ICS分類:	83.120 83.120    增強塑料 83.120
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局
發布日期:	2009-3-25
實施日期:	2010-1-1
標準狀態:	valid
替代舊標準:	GB/T 16778-1997 纖維增強塑料結構件失效分析一般程序
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4000 字
翻譯價格(元):	100.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the general procedure of failure analysis for fiber reinforced plastics structural products. This standard is applicable to the failure analysis for fiber reinforced plastic structural products. 2 Normative References The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies. GB/T 2576 Test Method for Insoluble Matter Content of Resin Used in Fiber Reinforced Plastics GB/T 2577 Test Method for Resin Content of Glass Fiber Reinforced Plastics GB/T 3365 Carbon Fiber Reinforced Plastics - Determination of Void Content and Fiber Volume Content GB/T 3854 Test Method for Hardness of Reinforced Plastics by Means of a Barcol Impresser GB/T 3855 Test Method for Resin Content of Carbon Fiber Reinforced Plastics GB/T 6041 General Rules for Mass Spectrometric Analysis GJB 1038.1 Non-destructive Inspecting Methods for Fiber Reinforced Plastics - Ultrasonic Inspecting GJB 1038.2 Non-destructive Inspecting Methods for Fiber Reinforced Plastics - X-ray Inspecting Method HB 5416 Inspection Method for Infrared Spectrum of Aviation Non-metal Material JC/T 287 Test Method for Void Content of Fibre Reinforced Plastics 3 General Procedure of Failure Analysis

Foreword i 1 Scope 2 Normative References 3 General Procedure of Failure Analysis 4 Failure Analytical Approach