標準編號:	GB/T 3855-2005
中文名稱:	碳纖維增強塑料樹脂含量試驗方法
英文名稱:	Test method for resin content of carbon fiber reinforced plastics
中標分類:	Q23    纖維增強復合材料
行業分類:	GB    國家標準
ICS分類:	83.120 83.120    增強塑料 83.120
發布機構:	中國國家標準化管理委員會 國家質量監督檢驗檢疫總局
發布日期:	2005-5-18
實施日期:	2005-12-1
標準狀態:	valid
替代舊標準:	GB/T 3855-1983 碳纖維增強塑料樹脂含量試驗方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	360.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the specimens, test apparatus and reagents, test procedures, calculations, test results and test reports, etc. in the test of resin content of carbon fiber reinforced plastics. This standard is applicable to carbon fiber reinforced plastics in which sulfuric acid may completely decompose the resin matrix under certain conditions without excessively corroding the fibers. 2 Normative reference The following document contains provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendment to (excluding any corrigendum), or revision of, any of the publication does not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated reference, the latest edition of the normative document applies. GB/T 1463 Test methods for density and relative density of fiber reinforced plastics 3 Principle of method For specimens of known mass, the matrix part is digested by hot sulfuric acid medium. The residue containing the reinforced material is filtered, cleaned, dried, cooled and weighed after the matrix is dissolved in hot sulfuric acid. The mass fraction of reinforced material is calculated. The fiber volume fraction is calculated according to the densities of composite material and reinforced material. The mass of reinforced material needs to be corrected if it changes during digestion. 4 Specimen 4.1 Specimen mass and thickness The specimen mass is about 0.5g and the thickness of specimen is less than 3mm.

Foreword i 1 Scope 2 Normative reference 3 Principle of method 4 Specimen 5 Test apparatus and reagent 6 Test procedure 7 Calculation 8 Test result 9 Test report Annex A (Normative) Conversion of fiber volume content of carbon fiber reinforced plastics