標準編號:	GB/T 19514-2024
中文名稱:	乘用車行李艙容積的測量方法
英文名稱:	Method of measuring volume for passenger car luggage compartment
中標分類:	T04    基礎標準與通用方法
行業分類:	GB    國家標準
ICS分類:	43.040.60 43.040.60    車身及車身附件 43.040.60
發布機構:	國家市場監督管理總局 中國國家標準化管理委員會
發布日期:	2024-05-28
實施日期:	2024-9-1
標準狀態:	valid
替代舊標準:	GB/T 19514-2004 乘用車 行李艙 標準容積的測量方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	16000 字
翻譯價格(元):	1120.0
交付時間:	付款后 1~3 個工作日

GB/T 19514-2024 Method of measuring volume for passenger car luggage compartment Warning: This document is to define a uniform measurement basis and method, mainly to characterize the storage capacity of a luggage compartment, and is not to guide the personnel using this document to carry out operations that affect driving safety. 1 Scope This document describes the unit module, the boundary and code of luggage compartment volume, the measurement method, and the representation of luggage compartment volume in the measurement of luggage compartment volume of a passenger car. This document applies to the measurement of luggage compartment volumes for vehicles of Category M1, and may serve as a reference for other types of vehicles. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 3730.1 Terms and definitions of motor vehicles, trailers and combination vehicle - Part 1: Types GB/T 4780 Terms for motor vehicle body GB/T 12673 Motor vehicle main dimensions measurement method GB 15083 Strength requirement and test method of automobile seats, their anchorages and any head restraints 3 Terms and definitions For the purpose of this document, the terms and definitions given in GB/T 3730.1, GB/T 4780, and GB/T 12673 as well as the following apply. 3.1 luggage compartment space in a vehicle body for luggage [Source: GB/T 4780-2020, 4.2.6] 3.2 reference volume of luggage compartment maximum sum of the volumes of the unit modules placed within the measurement boundary of a luggage compartment Note 1: The luggage compartment whose volume is to be measured may be a front luggage compartment, a rear luggage compartment through to the passenger compartment, a rear luggage compartment not through to the passenger compartment, or a concealed enclosed luggage compartment. Note 2: The volume unit is liter (L) or cubic decimeter (dm3). 3.3 unit module cuboid for measuring the volume of a luggage compartment that has standardized dimensions and is sufficiently rigid to resist deformation 3.4 front luggage compartment space for storage designed to be located in the powertrain compartment in the front of a vehicle 3.5 rear luggage compartment not through to the passenger compartment rear space for storage not through to the passenger compartment (with the luggage compartment partition fixed and undetachable) Note: The volume of a rear concealed enclosed luggage compartment is included in that of the rear luggage compartment not through to the passenger compartment 3.6 rear luggage compartment through to the passenger compartment rear space for storage through to the passenger compartment (with the luggage compartment partition detachable, foldable and retractable) Note: The volume of a rear concealed enclosed luggage compartment is included in that of the rear luggage compartment through to the passenger compartment 4 Unit module Each unit module is a cuboid, with the fillet radius of each edge not greater than 10mm, while its dimension error shall not exceed ±1mm. Each unit module shall be sufficiently rigid to resist deformation, with its dimensions as specified in Table 1.

Contents Foreword 1 Scope 2 Normative references 3 Terms and definitions 4 Unit module 5 Boundary and code of luggage compartment volume 6 Measurement method 7 Representation of luggage compartment volume Annex A (Informative) Measurement record of luggage compartment volume

乘用車行李艙容積的測量方法 重要提示：本文件旨在明確統一的測量基準和方法，主要表征行李艙儲物能力，并非引導使用本文件的人員進行影響行車安全的操作。 1 范圍 本文件描述了乘用車行李艙容積測量中的基準量塊、行李艙容積的界限及代碼、測量方法、行李艙容積的表示方法。 本文件適用于M?類汽車行李艙容積的測量，其他類型車輛參照執行。 2 規范性引用文件 下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中，注日期的引用文件，僅該日期對應的版本適用于本文件；不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。 GB/T 3730.1 汽車、掛車及汽車列車的術語和定義 第1部分：類型 GB/T 4780 汽車車身術語 GB/T 12673 汽車主要尺寸測量方法 GB 15083 汽車座椅、座椅固定裝置及頭枕強度要求和試驗方法 3 術語和定義 GB/T 3730.1、GB/T 4780和GB/T 12673界定的以及下列術語和定義適用于本文件。 3.1 行李艙 luggage compartment 供放置行李的車身空間。 [來源：GB/T 4780—2020，4.2.6] 3.2 行李艙容積 reference volume of luggage compartment 在行李艙測量界限內放入基準量塊的體積之和最大值。 注1:包含前置行李艙容積、后置貫通式行李艙容積、后置非貫通式行李艙容積以及隱藏式封閉行李艙容積。 注2:單位為升(L)或立方分米(dm3)。 3.3 基準量塊 unit module 用于測量行李艙容積且有標準尺寸規格、有足夠的硬度、不易發生形變的長方體。 3.4 前置行李艙 front luggage compartment 位于車輛前部，設計在動力總成艙內的儲物空間。 3.5 后置非貫通式行李艙 rear luggage compartment do not through to the passenger compartment 與乘客艙非貫通的后置儲物空間(行李艙隔板固定，不可拆除)。 注：后置隱藏式封閉行李艙容積包含在后置非貫通式行李艙容積中。 3.6 后置貫通式行李艙 rear luggage compartment through to the passenger compartment 與乘客艙貫通的后置儲物空間(行李艙隔板可拆除、翻折、收起)。 注：后置隱藏式封閉行李艙容積包含在后置貫通式行李艙容積中。 4 基準量塊 基準量塊為長方體，每條棱邊的圓角半徑應不大于10 mm，尺寸誤差應不超過±1mm，基準量塊 有足夠的硬度，不易發生形變，各量塊型號尺寸應符合表1的規定。