標準編號:	GB/T 21396-2008
中文名稱:	鞋類 成鞋試驗方法 幫底粘合強度
英文名稱:	Footwear—Test methods for whole shoe—Upper sole adhesoion
中標分類:	Y78    鞋、靴
行業分類:	GB    國家標準
ICS分類:	61.060 61.060    鞋襪 61.060
發布機構:	國家質量監督檢驗檢疫總局 國家標準化管理委員會
發布日期:	2008-02-03
實施日期:	2008-8-1
標準狀態:	superseded
被新標準替代:	GB/T 21396-2022 鞋類 成鞋試驗方法 幫底粘合強度
被替代日期:	2022-10-12
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	290.0
交付時間:	付款后 1 個工作日

1 Scope This standard describes a test method for the determination of the resistance to separation of the upper from the outsole or to separate adjacent layers of the outsole or to cause tear failure of the upper or the sole is measured. It also defines conditions of ageing that can be used for production control. It applies to all types of footwear (cementing, vulcanization, injection molding, etc.) where the evaluation of sole adhesion on the upper is needed and where the upper is continuously assembled (closed shoe). Notes: 1 In all cases the objective should be to test the bond strength nearest to the edge of the assembly. 2 The test need not be carried out when the bond has been made by grindery (using, for example, nails or screws) or stitching. 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies. GB/T 16825.1 Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines - Verification and Calibration of the Force-measuring System (GB/T 16825. 1-2002, ISO 7500-1:1999, Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines - Verification and Calibration of The Force-measuring System, IDT) EN 12222 Footwear - Standard Atmospheres for Conditioning and Testing of Footwear and Components for Footwear 3 Term and Definition For the purposes of this standard, the following term and definition apply.

Foreword 1 Scope 2 Normative References 3 Term and Definition 4 Apparatus and Material 5 Sampling and Conditioning 6 Test Method 7 Expression of Results 8 Test Report Appendix A (Normative) Ageing Process Conditions for the Upper-sole Adhesion Test Bibliography