Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.
This standard was proposed by China National Light Industry Council.
This standard is under the jurisdiction of National Technical Committee 46 on Household Electric Appliances of Standardization Administration of China (SAC/TC 46).
Intelligentization technology for intelligent household appliances - Particular requirements for washing machine
1 Scope
This standard specifies the technical requirements, inspection methods and assessment methods of intelligent washing machine.
This standard is applicable to intelligent washing machines with single-phase rated voltage not exceeding 250 V and used by non-professionals in home, shops, schools and other places.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 4288 Household and similar electrical washing machine
GB 4706.1 Household and similar electrical appliances - Safety - Part 1: General requirements
GB 4706.20 Household and similar electrical appliances - Safety - Particular requirements for tumble dryers
GB 4706.24 Household and similar electrical appliances - Safety - Particular requirements for washing machines
GB/T 13173-2008 Surface active agents - Detergents - Testing methods
GB/T 28219 General technology requirements for intelligent household appliances
3 Terms and definitions
For the purposes of this document, the terms and definitions specified in GB/T 28219 and GB/T 4288 and the following apply.
3.1
intelligent washing machine
household and similar electric washing machines with intelligentization technology or intelligent capability
?
3.2
local unit
intelligent washing machine
3.3
remote unit
system that can perform data interaction with local unit
Note to entry: Examples of remote units are mobile phones and service platforms
3.4
display terminal
display or operation device that can present human-machine interaction of an intelligent washing machine in the form of text, image, voice and the like
4 Technical requirements
4.1 General requirements
The intelligent washing machine shall meet the requirements of GB/T 28219.
4.2 Safety requirements
4.2.1 Safety requirements for electrical appliance
Intelligent washing machine shall meet the safety requirements specified in GB 4706.1, GB 4706.20 and GB 4706.24.
4.2.2 Safety requirements for intelligentization
Intelligent washing machine should be remotely controlled by intelligentization technology, and be equipped with remote control safety management function to ensure the safety of remote operation of intelligent washing machine.
If the local unit is equipped with the function of detecting whether there are potential safety hazards e.g. harming children, the local unit authorization method may not be adopted for permitting remote operation.
If the local unit is not equipped with the function of detecting whether there are potential safety hazards e.g. harming children, the remote unit shall be granted the necessary operation authority through the local unit, and the purpose of authorization is to realize the safety of remote operation of washing machine. The authorization is time-sensitive and shall meet one of the following conditions:
?
a) If a single authorization does not exceed 24 h, the authorization time may be appropriately extended again;
b) The remote operation can be interrupted by the operation of the local unit, if the remote operation need to be continued, remote unit shall be granted the necessary operation authorization again through the local unit;
c) Remote operation can be cancelled by local unit operation. if remote operation is to be performed again, necessary operation authorization shall be granted to the remote unit again by local unit.
4.3 Function requirements for intelligentization
4.3.1 Remote control
Intelligent washing machine should realize remote control through intelligentization technology to ensure its good operability of remote operation. The specific requirements are as follows:
a) The remote unit can establish network connection and application interaction with the local unit;
b) The remote unit can cancel the network connection and application interaction relationship established with the local unit;
c) Controlled by the remote unit, the local unit can perform corresponding control functions;
d) Controlled by the remote unit, the local unit performs corresponding functions, and there shall be clear feedback instructions for the local and the remote units.
4.3.2 Clothing information identification function
Intelligent washing machine should be equipped with clothing information identification function and interaction interface presenting the clothing information.
Clothing information includes but is not limited to: clothing attribute information such as quality, material, category and color, which shall meet the following requirements:
a) The grade of clothing quality identification shall have at least two grades such as low (L1), high (L2), etc.
b) The number of category of clothing material can be identified shall have at least 3 types, such as cotton, chemical fiber and wool;
c) The number of clothing category can be identified shall have at least 3 types, such as outerwear, underwear and socks;
d) The number of clothing color can be identified shall have at least 2 types, such as dark color and light color.
4.3.3 Detergent identification and automatic release function
Intelligent washing machine should be equipped with detergent information identification function and automatic release function that meet the following requirements:
a) Identify the concentration type of detergent, and shall have at least two types (ordinary and concentrated);
b) It can store and automatically release two or more kinds of detergents for different purposes, such as: ordinary detergents and special detergents for silk and wool etc.
Equipped with an interaction interface with presentation of detergent information and auto-dispensing information, such as one or more display interfaces of intelligent washing machine display screen, mobile phone screen, computer screen or other terminal equipment.
4.3.4 Washing program management
Intelligent washing machine should realize washing program management through intelligentization technology. Based on environmental information, laundry information, detergent information, user information, etc., the laundry program mode or parameters can be updated "automatically" or "manually" or both. It shall meet the following requirements:
a) The updated program or parameter may be the adjustment of existing data at the local unit, or the download from the remote unit or the push from the remote unit to the local unit;
b) The updated program or parameter can better complete the washing work.
Note: Better completion of washing work includes: better water saving, better power saving, better care of clothes, cleaner washing, cleaner rinsing, less vibration, less noise, etc.
?
4.3.5 Water and electricity management function
Intelligent washing machine should realize the statistics, display and management functions of water consumption and electricity consumption through intelligentization technology, and shall meet the following requirements:
a) The deviation between the displayed water consumption and the measured value shall not be greater than 20%;
b) The deviation between the displayed electricity consumption and the measured value shall not be greater than 20%;
c) The local unit or remote unit can synchronously check the statistical information of water and electricity consumption of the intelligent washing machine according to different washing cycle dimensions.
Note: Washing cycle dimension can include washing times, days, weeks, months, years, cumulative, etc.
4.3.6 Self-cleaning function
Intelligent washing machine shall be equipped with the function to keep itself clean or conduct self-cleaning automatically and avoid secondary pollution, and shall meet at least one of the following requirements:
a) Automatically display maintenance tips after running for a certain period;
b) Keep the machine clean during operation.
4.3.7 Fault alarm and analysis
Intelligent washing machine should automatically take alarm measures when alarm occurs at the local end. If there is a remote network connection, it can also send alarm information to the remote end synchronously to prompt the user remotely. It shall meet the following requirements:
a) The machine can carry out partial or full self-inspection on the state of its own components, such as door switch, water inlet, drainage, motor and other components working status;
b) The machine can predict potential faults, and users and manufacturers can be prompted in advance before the faults occur, and users have the authority to enable this function, such potential faults as filter blockage and belt wear;
?
c) The machine can be diagnosed on-line through the service platform, and the user has the authority to enable this function or not;
d) The machine can send the fault information and user information to the after-sales service department for automatic repair report through the service platform, and the user has the authority to enable this function or not.
4.3.8 On-line upgrade
The local end or remote end of the intelligent washing machine should have the on-line upgrade function for programs, and have the mode of recording and displaying upgrade information, which shall meet the following requirements:
a) The machine shall have the function of on-line upgrade for at least one of the following programs:
——display terminal control program upgrade;
——communication module program upgrade;
——firmware upgrade of electronic control board control program and other components.
b) After the successful upgrade, the intelligent washing machine functions normally and conforms to the functional logic defined after the upgrade.
c) After the intelligent washing machine failed to upgrade due to abnormality, the original version shall be restored and each function can be used normally.
d) View the upgrade information in any one or more of the following ways:
——the local unit interaction interface;
——remote unit interaction interface: for example, mobile phone, PAD, etc.
4.3.9 Third-party application services
Intelligent washing machines may have the function of using third-party application services, and shall meet at least one of the following requirements:
a) Connect to the third-party service platform, e.g. public interconnection, through the remote unit, and be able to use the application service of the third party;
b) Connect to the third-party service platform, e.g. public interconnection, through the local unit, and be able to use the application service of the third party.
Note: Examples of third-party application services are weather service and shopping application, etc. Through interconnection and intercommunication, product functions can be better expanded to enhance the convenient experience of users.
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
4.1 General requirements
4.2 Safety requirements
4.3 Function requirements for intelligentization
5 Inpsection method
5.1 Test conditions
5.2 Test method of safety requirements
5.3 Test method of intelligentization function
6 Assessment method
6.1 General assessment requirements
6.2 Intelligentization degree score
6.3 Intelligent index evaluation
Annex A (Informative) Intelligent index grade
智能家用電器的智能化技術
洗衣機的特殊要求
1 范圍
本標準規定了智能洗衣機的技術要求、檢測方法和評價方法。
本標準適用于單相額定電壓不超過250V，在家庭、商店、學校等場所由非專業人員使用的智能洗衣機。
2 規范性引用文件
下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。
GB／T 4288 家用和類似用途電動洗衣機
GB 4706.1 家用和類似用途電器的安全 第1部分：通用要求
GB 4706.20 家用和類似用途電器的安全 滾筒式干衣機的特殊要求
GB 4706.24 家用和類似用途電器的安全 洗衣機的特殊要求
GB／T 13173—2008 表面活性劑 洗滌劑試驗方法
GB／T 28219 智能家用電器通用技術要求
3 術語和定義
GB／T 28219和GB／T 4288界定的以及下列術語和定義適用于本文件。
3.1
智能洗衣機 intelligent washing machine
應用了智能化技術或具備智能化能力的家用和類似用途電動洗衣機。
3.2
本機端 local unit
智能洗衣機本體。
3.3
遠程端 remote unit
可與本機端進行數據交互的系統。
注：遠程端的示例為手機、服務平臺等。
3.4
顯示終端 display terminal
一種可以以文字、圖像、語音等形式呈現智能洗衣機人機交互的顯示或操作裝置。
4 技術要求
4.1 通用要求
智能洗衣機應符合GB／T 28219的要求。
4.2 安全要求
4.2.1 電器安全要求
智能洗衣機應滿足GB 4706.1、GB 4706.20和GB 4706.24的安全要求。
4.2.2 智能化安全要求
智能洗衣機宜通過智能化的技術實現遠程控制，具有遠程控制安全管理功能，確保遠程操作智能洗衣機的安全。
本機端具有檢測是否存在傷害兒童等安全隱患功能的，對于許可遠程操作運行，可以不采用本機端授權方式。
本機端不具有檢測是否存在傷害兒童等安全隱患功能的，對于許可遠程操作運行，應通過本機端為遠程端授以必要的操作權限，授權的目的是實現洗衣機遠程操作的安全。該授權有時效性，應滿足下列情況之一：
a) 單次授權不超過24 h，可再次適當延長授權時間；
b) 本機端操作能中斷遠程操作，如要繼續遠程操作，需通過本機端再次為遠程端授以必要的操作權限；
c) 本機端操作能取消遠程操作，如要重新遠程操作，需通過本機端再次為遠程端授以必要的操作權限。
4.3 智能化功能要求
4.3.1 遠程操控
智能洗衣機宜通過智能化的技術實現遠程控制，確保遠程操作智能洗衣機有良好的可操作性，具體要求如下：
a) 遠程端能夠與本機端建立網絡連接及應用交互；
b) 遠程端能夠取消或解除與本機端建立的網絡連接及應用交互關系；
c) 通過遠程端操控本機端，本機端可執行相應操控功能；
d) 通過遠程端操作本機端，本機端執行相應功能，本機端和遠程端應有明確的反饋指示。
4.3.2 衣物信息識別功能
智能洗衣機宜具有衣物信息識別功能和呈現衣物信息的交互界面。
衣物的信息包括但不限于：質量、材質、類別、顏色等衣物屬性信息，應滿足如下要求：
a) 衣物質量識別的大小等級不低于2擋，例如：低(L1)、高(L2)等；
b) 衣物材質識別的種類不低于3種，例如：棉、化纖、羊毛等；
c) 衣物類別識別的種類不低于3種，例如：外衣、內衣、襪子等；
d) 衣物顏色識別的種類不低于2種，例如：深色、淺色等。
4.3.3 洗滌劑識別及自動投放功能
智能洗衣機宜具有洗滌劑信息識別功能及自動投放功能，滿足如下要求：
a) 識別洗滌劑的濃縮類型，類型不低于2擋(普通、濃縮)；
b) 同時存儲和自動投放2種及以上不同用途類型的洗滌劑，例如：普通、絲毛專用等。
具有呈現洗滌劑信息和自動投放信息的交互界面，例如：智能洗衣機顯示屏、手機屏、電腦屏或其他終端設備顯示界面的一個或幾個。
4.3.4 洗滌程序管理
智能洗衣機宜通過智能化技術實現洗滌程序管理。根據環境信息、衣物信息、洗滌劑信息、用戶信息等，實現洗衣程序模式或參數的更新，更新為“自動”或“手動”或兩者皆可。應符合以下要求：
a) 更新的程序或參數可以是在本機端對現有數據進行調整，也可以是本機端從遠程端下載或遠程端向本機端推送；
b) 更新的程序或參數可以更好地完成洗衣工作。
注：更好地完成洗衣工作包括：更佳節水、更佳節電、更佳呵護衣物、洗的更干凈、漂的更干凈、振動更小、降低噪聲等方面的一個或幾個。
4.3.5 水電管理功能
智能洗衣機宜通過智能化技術實現用水量、用電量的統計、展示和管理功能，應符合以下要求：
a) 用水量顯示值與實測值的偏差不大于±20％；
b) 用電量顯示值與實測值的偏差不大于±20％；
c) 本機端或遠程端可以同步按不同洗衣周期維度查看智能洗衣機的用水、用電統計信息。
注：洗衣周期維度可包括洗衣次數、天、周、月度、年度、累計等。
4.3.6 自清潔功能
智能洗衣機宜具有保持自身潔凈或自動潔凈、避免二次污染的功能，應符合以下要求中至少一項：
a) 在運行一定周期后自動給出維護保養提示；
b) 在運行過程中保持自身的潔凈。
4.3.7 故障報警和分析
智能洗衣機宜在本機端發生報警時能自動采取報警措施，如有遠程網絡連接，還可以將報警信息同步發送到遠程端，遠程提示用戶的功能。應符合以下要求：
a) 可對自身各部件狀態進行部分或全部自檢，例如：門開關、進水、排水、電機等部件工作狀態；
b) 可預測潛在的故障，并在故障發生前提前預測，提示用戶和廠商，且用戶具有是否啟用該功能的權限，例如：過濾器堵塞、皮帶磨損等潛在故障；
c) 可通過服務平臺對本機進行在線診斷，且用戶具有是否啟用該功能的權限；
d) 可通過服務平臺將故障信息和用戶信息發送到售后服務部門進行自動報修，且用戶具有是否啟用該功能的權限。
4.3.8 在線升級
智能洗衣機本機端或遠程端宜具有程序在線升級的功能，并有記錄和顯示升級信息的方式，應符合以下要求：
a) 具備以下至少一種程序在線升級的功能：
——顯示終端控制程序升級；
——通訊模塊程序升級；
——電控板控制程序及其他部件固件升級。
b) 智能洗衣機升級成功后功能正常，且符合升級后所定義的功能邏輯。
c) 智能洗衣機異常升級失敗后，恢復原來版本，且各個功能可以正常使用。
d) 通過以下任意一種或幾種方式查看升級信息：
——本機端交互界面；
——遠程端交互界面：例如：手機、PAD等。
4.3.9 第三方應用服務
智能洗衣機可具備使用第三方應用服務的功能，應符合以下要求中至少一項：
a) 通過遠程端連接到公共互聯等第三方服務平臺，能夠使用第三方的應用服務；
b) 通過本機端連接到公共互聯等第三方服務平臺，能夠使用第三方的應用服務。
注：第三方的應用服務示例為天氣服務、購物商城等。通過互聯互通更好地擴展產品功能，增強用戶使用的便捷體驗。
5 檢測方法
5.1 試驗條件
試驗在下述條件下進行：
a) 環境溫度為(23±2)℃；
b) 環境相對濕度為(65±20)％；
c) 智能洗衣機如通過智能化的技術實現遠程控制，則將智能洗衣機按說明書要求安裝調試好，保證有穩定良好的網絡環境，并通信正常。
5.2 安全要求的試驗方法
5.2.1 通用要求安全試驗方法
應按照GB 4706.1、GB 4706.20和GB 4706.24的要求進行試驗或文件符合性審查。
5.2.2 智能化安全要求試驗方法
智能化安全要求測試根據智能洗衣機是否具有檢測筒(桶)內有兒童等安全隱患功能，分為兩種情況進行測試：
具有檢測筒(桶)內有兒童等安全隱患功能測試方法：
a) 將質量為(1.5±0.5)kg的兔子放入智能洗衣機，并關閉智能洗衣機門；
b) 檢測遠程端能否啟動智能洗衣機；
c) 試驗過程，確認本機端能啟動后，應立即結束程序運行，確保試驗對象安全。
注：啟動后，運行必要的檢測程序是允許的，但不能造成對試驗對象的物理傷害。
不具有檢測筒(桶)內有兒童等安全隱患功能測試方法：
a) 檢測遠程端控制智能洗衣機啟動是否需要在本機端操作授權；
b) 檢測授權是否在一定時間內被自動取消、或本機端操作是否會暫時中斷遠程授權、或本機端操作是否會自動取消遠程授權。
5.3 智能化功能的試驗方法
5.3.1 遠程操控試驗方法
視檢說明書遠程操控功能，并按下述試驗方法手動操作本機端、遠程端，且應符合4.3.1的要求：
a) 測試綁定成功率：操作遠程端與本機端建立綁定關系，試驗次數為30次；
b) 測試解綁成功率：操作取消或解除遠程端與本機端綁定關系，試驗次數為30次；
c) 測試響應時間：通過遠程端操作本機端功能，本機端執行相應功能，試驗次數為30次，其中測試響應時間為發送、執行、反饋過程的總時間；
d) 測試操作成功率：通過遠程端操作本機端功能，試驗次數應不小于100次。
5.3.2 衣物識別管理試驗方法
視檢說明書如有衣物識別功能的相關聲明，按照說明書描述的可識別衣物的方式準備三種衣服：白色棉襯衣、藍色棉牛仔褲、白色羊毛衫，主材質含量不小于75％。按照說明書描述的可識別的方式測試洗衣機識別結果，結果應符合4.3.2的要求。
5.3.3 洗滌劑識別及自動投放功能試驗方法
視檢說明書如有洗滌劑濃縮類型識別功能的相關聲明，按照下述試驗方法試驗，結果應符合4.3.3要求：
a) 濃縮類型可以通過洗滌劑中活性物含量進行區分，測試用洗滌劑樣品的確定：購買市售且按GB／T 13173—2008第7章規定的方法測定總活性物含量分別在(15±5)％的普通洗滌劑和在(25±5)％的濃縮洗滌劑。
b) 將普通和濃縮洗滌劑測試樣品分別倒入洗滌劑投放盒，視檢智能洗衣機能否識別出兩類洗滌劑濃縮類型。
注：識別結果不能在智能洗衣機顯示屏、手機、電腦或其他終端設備的一個或幾個方便地進行查看的，廠家應配合提供智能洗衣機進入特殊模式可以查看的方法，如進入測試模式。
視檢說明書如有洗滌劑自動投放功能的相關聲明將適量洗滌劑添加自動投放裝置，運行一個常用(標準)洗滌程序并開啟自動投放功能，觀察洗滌劑投放裝置內的洗滌劑的剩余量。
視檢說明書如有同時存儲和自動投放多種用途類型洗滌劑功能的相關聲明將適量的多種洗滌劑添加到自動投放裝置，按照說明書的描述運行與洗滌劑投放對應的洗滌程序并開啟自動投放功能，觀察洗滌劑投放裝置內的洗滌劑的剩余量，其中，每種洗滌劑測試一個洗滌周期。
5.3.4 洗滌程序管理試驗方法
視檢說明書如有程序模式和參數更新等功能的相關聲明，按照說明書的描述改變影響程序模式和參數的因素，查看程序模式和參數更新情況。結果應符合4.3.4的要求。
5.3.5 水電管理功能試驗方法
視檢說明書如有水電管理功能的相關聲明，應按照說明書明示的常用(標準)洗滌程序測試用水、用電數據。運行程序過程中記錄試驗檢測儀器檢測的和本機端和／或遠程端展示的用水、用電數據。結果應符合4.3.5的要求。
5.3.6 自清潔功能試驗方法
視檢說明書如有自身的潔凈功能的相關聲明按照下述試驗方法試驗，結果應符合4.3.6的要求：
a) 洗滌筒(桶)潔凈試驗方法
檢測洗衣機是否為套筒(桶)結構，若是，則進一步檢測洗衣機運行常用(標準)程序的過程中，是否有水進入套筒(桶)之間并能回流到內筒(桶)。
視檢說明書是否有洗滌筒(桶)清潔保養提示和保持或恢復自身潔凈等功能的相關聲明。
b) 投放系統潔凈試驗方法
視檢說明書是否有投放系統清潔保養提示和保持或恢復自身潔凈等功能的相關聲明。
c) 門封潔凈試驗方法
視檢說明書是否有門封清潔保養提示和保持或恢復自身潔凈等功能的相關聲明。
d) 烘干系統潔凈試驗方法
視檢說明書是否有烘干系統清潔保養提示和保持或恢復自身潔凈等功能的相關聲明。
5.3.7 故障報警和分析試驗方法
按照表1在智能洗衣機的本機端人為操作設定故障，確認智能洗衣機是否能檢測出故障并通過網絡報警通知遠程端。如果有其他故障，可以根據制造商自定義故障設置方法測試。
