標準編號:	QC/T 1204.5-2024
中文名稱:	純電動乘用車車載換電系統互換性 第5部分：車輛與電池包的通信
英文名稱:	Compatibility of on-board battery swap system for battery electric passenger vehicles - Part 5 : Communication between electric vehicle and battery pack
中標分類:	T36    電子、電氣設備
行業分類:	QC    汽車行業標準
ICS分類:	43.040 43.040    道路車輛裝置 43.040
發布機構:	中華人民共和國工業和信息化部
發布日期:	2024-07-05
實施日期:	2025-1-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	23000 字
翻譯價格(元):	1610.0
交付時間:	付款后 1~5 個工作日

QC/T 1204.5-2024 Compatibility of on-board battery swap system for battery electric passenger vehicles - Part 5: Communication between electric vehicle and battery pack 1 Scope This document specifies the rules and requirements for communication between electric vehicle and battery pack of battery swap system for battery electric passenger vehicles. This document is applicable to the communication between electric vehicle and battery pack for on-board battery swap system for battery electric passenger vehicles. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 19596 Terminology of electric vehicles GB/T 32960.3 Technical specifications of remote service and management system for electric vehicles - Part 3: Communication protocol and data format GB/T 34014 Coding regulation for automotive traction battery 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 19596 and the following apply. 3.1 battery management system; BMS system capable of monitoring the state (e.g. temperature, voltage and state of charge) of battery and providing communication, safety, cell equalization and management control for battery as well as providing the communication interface with application equipment 3.2 frame set of data bits constituting a complete message 3.3 messages one or more "CAN/CANFD data frames" having the same parameter group number 3.4 available energy energy that can be released from the current battery according to the specified discharge conditions 3.5 insulation resistance equivalent resistance of high voltage system to ground 3.6 electronic control unit; ECU on-board computer composed of microcomputer and peripheral circuit 3.7 diagnostic trouble code; DTC 4-byte value used to identify the type of failure, associated failure mode, and the number of occurrences 3.8 unified diagnostic services; UDS uniform diagnostic service standards performed by ECU with diagnostic function 4 General provisions 4.1 CAN2.0B/CAN FD/wireless communication protocols shall be adopted for the communication network between the electric vehicle and the swappable battery pack BMS. 4.2 The communication between the electric vehicle and the swappable battery pack BMS shall comply with the UDS diagnostic protocol. 4.3 The swappable battery pack BMS shall realize the monitoring and reporting of high voltage insulation resistance. 4.4 The swappable battery pack BMS shall monitor and report the high voltage interlock status. 4.5 The swappable battery pack BMS with battery thermal management function shall realize the temperature monitoring of battery cooling interface. 4.6 Refer to ISO 14229 and ISO 15765 for diagnostic services.

Contents Foreword III Introduction IV 1 Scope 2 Normative references 3 Terms and definitions 4 General provisions 5 Network topology 6 Format and requirements for communication topology message between vehicle and BMS network Annex A (Informational) Format of network management message Bibliography

純電動乘用車車載換電系統互換性 第5部分：車輛與電池包的通信 1 范圍 本文件規定了純電動乘用車換電車輛與電池包之間的通信規則及要求。 本文件適用于純電動乘用車車載換電系統中車輛與電池包的通信。 2 規范性引用文件 下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中，注日期的引用文 件，僅該日期對應的版本適用于本文件；不注日期的引用文件，其最新版本(包括所有的修改單)適用于 本文件。 GB/T19596 電動汽車術語 GB/T 32960.3 電動汽車遠程服務與管理系統技術規范 第3部分：通信協議及數據格式 GB/T 34014 汽車動力蓄電池編碼規則 3 術語和定義 GB/T19596 界定的以及下列術語和定義適用于本文件。 3.1 蓄電池管理系統 battery management system;BMS 監視蓄電池的狀態(溫度、電壓、荷電狀態等),可以為蓄電池提供通信、安全、電芯均衡及管理控制， 并提供與應用設備通信接口的系統。 3.2 幀 frame 組成一個完整信息的一系列數據位。 3.3 報文 messages 一個或多個具有相同參數組編號的"CAN/CANFD 數據幀"。 3.4 可用能量 available energy 從當前電池中按照規定放電條件可以釋放的能量。 3.5 絕緣阻值 insulation resistance 高壓系統對地的等效電阻值。 3.6 電子控制單元 electronic control unit;ECU 由微機和外圍電路組成的車載電腦。 診斷故障代碼 diagnostic trouble code;DTC 用于識別故障類型、相關故障模式以及發生次數的4字節數值。 統一診斷服務 unified diagnostic services;UDS 具備診斷功能的 ECU 控制器執行統一的診斷服務標準。 4 總則 4.1 車輛與可換電電池包BMS 之間通信網絡應采用CAN2.0B/CAN FD/無線通信協議。 4.2 車輛與可換電電池包BMS 之間通信應滿足UDS 診斷協議。 4.3 可換電電池包BMS 應實現對高壓絕緣電阻的監控和上報。 4.4 可換電電池包BMS 應實現對高壓互鎖狀態的監控和上報。 4.5 具有電池?zé)峁芾砉δ艿目蓳Q電電池包BMS 應實現電池冷卻接口溫度監控。 4.6 診斷服務參考 ISO 14229和 ISO 15765。