標準編號:	TSG G3001-2004
中文名稱:	鍋爐安裝改造單位監督管理規則
英文名稱:	Boiler Installation and Alteration Enterprises
中標分類:	27.060.01
行業分類:	TSG    特種設備安全技術規范
發布機構:	國家質量技術監督局
發布日期:	2004-6-28
實施日期:	2005-7-28
標準狀態:	superseded
被新標準替代:	TSG 07-2019 特種設備生產和充裝單位許可規則
被替代日期:	2019-5-13
翻譯語言:	英文
文件格式:	PDF
中文字符數:	8000 字
翻譯價格(元):	240.0
交付時間:	付款后 1 個工作日

Chapter 1 General Regulations Article 1 This Regulation is formulated to strengthen the supervision and administration of boiler installation and alteration, standardize the license for boiler installation and alteration and ensure boiler installation and alteration quality and the safe operation of boiler according to those specified in "Special Equipment Safety Supervision Regulations" (hereinafter referred to as "Regulations"). Article 2 The enterprises that are engaged in the installation and alteration of boiler within the specified range of "Regulations" and pipeline within the boiler range must obtain the "Installation, Alteration, Repair and Maintenance License of Special Equipment" (hereinafter referred to as license) issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China (hereinafter referred to as "AQSIQ") and may only be engaged in the boiler installation and alteration within the license range. The boiler-manufacturing enterprises having obtained the boiler-manufacturing license may alter the boilers manufactured by themselves and install the packaged (assembled) delivery boilers manufactured by themselves, and do not need to take other license. Quality and technical supervision departments in the province, autonomous region or municipality where the boiler installation and alteration enterprises are located shall be responsible for the acceptance, examination and approval for the license of boiler installation and alteration. Note: Packaged (assembled) delivery boilers refer to those that the pressure parts of the boiler proper have been subjected to assembling and welding in the manufacturer and such operation will thus be not carried out in the installation site. Article 3 All-level quality and technical supervision departments shall be responsible for supervising the implementation of this Regulation. Chapter 2 Basic Conditions for License Level and Enterprises Article 4 License levels of boiler installation and alteration are classified as follows: Level License range of boiler installation and alteration 1 Unlimited parameter 2 Boilers with the rated outlet pressure less than or equal to 2.5MPa 3 Packaged (assembled) boilers with the rated outlet pressure less than or equal to 1.6MPa; cast-iron boilers installed and assembled on site Note: The boiler installation and alteration enterprises engaged in relatively simplex working range may apply for the license within single-item range, e.g. limited for installation (or alteration) or cast-iron boiler etc. Article 5 The boiler installation and alteration enterprises shall be possessed of the basic conditions below: (1) Obtaining the industrial and commercial business license; (2) Having fixed office location, data archives, instrument and equipment room and warehouse; (3) Being possessed of various engineers and technicians and skilled workers who can adapt to the boiler installation and alteration and who are possessed of certain installation and alteration experience, and specific requirements are detailed in Attachment 1; (4) Being possessed of tooling equipment and detection means adaptive to the boiler installation and alteration to meet the requirements for welding, expanding, lifting, incising, pipe bending, boiler building, pressure testing, heat treating and non-destructive testing, electric meter, specific requirements are detailed in Attachment 2; (5) Establishing the quality administration system that can ensure the boiler installation and alteration quality and being possessed of safety technical codes, specifications, standards and systems relative to the boiler installation and alteration, specific requirements are detailed in Attachment 3; (6) Ensuring the quality administration system can operate effectively and relevant safety technical codes, specifications, standards and systems can be implemented effectively; (7) For the enterprises require to replace the license due to expiration, the installation and alteration quality shall be in good condition, no serious liability accidents on installation and alteration quality shall occur within 4 years, the break-in period to engage in the boiler installation and alteration appropriate to that at the original level shall not exceed 2 years, and they shall not violate the requirements of Article 15 and fail to perform Article 16 in this Regulation during holding the license. Chapter 3 Licensing Procedures of Boiler Installation and Alteration Article 6 The quality licensing procedures of boiler installation and alteration enterprises include application, acceptance, appraisal and evaluation and examination and approval for issuing the license. Article 7 The boiler installation and alteration enterprises conformable to the requirements of this Regulation shall fill in the "Application Form for Licensing of the Installation, Alteration, Repair and Maintenance of Special Equipment" (hereinafter referred to as "Application Form", in quadruplicate) and provide proving data below (each in one copy), apply for the local provincial quality and technical supervision departments in written form: (1) Industrial and commercial business license (copy); (2) The enterprise information (including office, data archives, instrument and equipment room, warehouse, workshop, personnel condition and quality administration condition etc.); (3) Quality administration manual; (4) Other parenthetical information. Article 8 Local provincial quality and technical supervision departments, after receiving the application, shall examine and verify the conditions of application enterprises, decide whether to accept the application within 5 working days and issue opinions on acceptance or reject in written form. Application enterprises having been subjected to acceptance may be engaged in the trial installation and alteration within the acceptance range, valid for one year. Because the installation and alteration of large station boilers is in relatively long construction period, the enterprises applying for the license of Level 1-boiler installation and alteration are permitted to extend the valid period for trial installation and alteration by one year after obtaining the agreement of local provincial quality and technical supervision departments. Article 9 The enterprises approving the acceptance, during the valid period of trial installation and alteration, shall invite the appraisal and evaluation organizations for the boiler installation and alteration (hereinafter referred to as the appraisal and evaluation organizations) to appraise and evaluate the acceptance approval from the acceptance date; the original acceptance approval will be invalided automatically if the above enterprises do not apply for appraisal and evaluation within the valid period. The appraisal and evaluation organizations shall examine the basic conditions of installation and alteration enterprises item by item, carry out on-site examination for construction technical data and installation and alteration quality, and inspect the operating condition of quality administration system, boiler installation and alteration quality and data on original record and quality certificate etc. according to the requirements of Chapter 2 in this Regulation. After the appraisal and evaluation, the appraisal and evaluation organizations shall submit the appraisal and evaluation report to the local provincial quality and technical supervision departments (hereinafter referred to as examining and approving authorities) in charge of the examination and approval within 30 working days. Article 10 The examining and approving authorities shall examine and verify the appraisal & evaluation report within 30 working days and perform the approval procedure; those meeting conditions shall be issued with licenses of corresponding levels. Article 11 The license for boiler installation and alteration shall be valid nationwide within 4 years from the signing and issuing date. Article 12 If the installation and alteration enterprises change the enterprise name, legal representative, main technical principal, registration address or close business, they shall report to the original license issuing authorities to transact altering, filing or canceling procedures.

Chapter 1 General Regulations Chapter 2 Basic Conditions for License Level and Enterprises Chapter 3 Licensing Procedures of Boiler Installation and Alteration Chapter 4 Supervision and Administration Chapter 5 Supplementary Regulations Attachment 1 Basic Requirements for Personnel in Boiler Installation and Alteration Enterprises Attachment 2 Basic Requirements for Tooling and Testing Equipment of Boiler Installation and Alteration Enterprises Attachment 3 Basic Requirements for the Quality Administration System of Boiler Installation and Alteration Enterprises

第一章 總 則 第一條 為了加強鍋爐安裝改造監督管理，規范鍋爐安裝改造許可工作，保障鍋爐安裝改造質量和鍋爐安全運行，根據《特種設備安全監察條例》（以下簡稱《條例》）的有關規定，制定本規則。 第二條 凡在我國境內從事《條例》規定范圍內鍋爐及鍋爐范圍內管道的安裝改造工作的單位必須取得國家質量監督檢驗檢疫總局（以下簡稱國家質檢總局）頒發的《特種設備安裝改造維修許可證》（以下簡稱許可證），且只能從事許可證范圍內的鍋爐安裝改造工作。已獲得鍋爐制造許可的鍋爐制造企業可以改造本企業制造的鍋爐和安裝本企業制造的整（組）裝出廠的鍋爐，無需另取許可證。 鍋爐安裝改造的許可工作中的受理、審批由鍋爐安裝改造單位所在地的省、自治區、直轄市質量技術監督部門負責。 注：整（組）裝出廠的鍋爐是指鍋爐本體承壓件已在制造廠內組焊完畢，在安裝現場不進行承壓件組焊工作的鍋爐。 第三條 各級質量技術監督部門負責監督本規則的實。 第二章 許可證級別及單位的基本條件 第四條 鍋爐安裝改造許可證級別劃分如下： 級別 許可安裝改造鍋爐的范圍 1 參數不限 2 額定出口壓力≤2.5MPa的鍋爐 3 額定出口壓力≤1.6MPa的整（組）裝鍋爐；現場安裝、組裝鑄鐵鍋爐 注：對于從事較單一工作范圍的鍋爐安裝改造單位，可申請單項范圍的許可，如：限安裝（或改造）、限鑄鐵鍋爐等。 第五條 鍋爐安裝改造單位應當具備以下基本條件： （一）取得工商營業執照； （二）有固定的辦公地點、資料檔案室、儀器設備室和倉庫； （三）具有與鍋爐安裝改造工作相適應的各類工程技術人員和技術工人，而且具有一定的安裝改造經驗，具體要求見附件1； （四）具有與鍋爐安裝改造工作相適應的工裝設備及檢測手段，以滿足焊接、脹接、起重、切割、彎管、筑爐、試壓、熱處理及無損檢測、電器儀表等工作的需要，具體要求詳見附件2； （五）建立能夠確保鍋爐安裝改造質量的質量管理體系，具有與鍋爐安裝改造工作相關的安全技術規范、規定、標準和制度，具體要求見附件3； （六）質量管理體系能夠有效運轉，有關安全技術規范、規定、標準和制度能夠有效貫徹執行； （七）對于許可證有效期滿需要換證的單位，其安裝改造質量良好，4年內未發生過安裝改造質量嚴重責任事故，從事與原級別相適應的鍋爐安裝改造工作的間斷期不超過2年，持證期間內未出現過違反本規則第十五條的規定和不履行第十六條的情況。 第三章 鍋爐安裝改造許可程序 第六條 鍋爐安裝改造單位資格許可的工作程序包括申請、受理、鑒定評審和審批發證。 第七條 符合本規則規定的鍋爐安裝改造單位，填寫《特種設備安裝改造維修許可申請書》（以下簡稱申請書，一式四份）并附下列證明資料（各一份），向單位所在地的省級質量技術監督部門提出書面申請： （一）工商營業執照（復印件）； （二）單位情況介紹（應包括辦公室、資料檔案室、儀器設備室、倉庫、車間、人員情況、質量管理情況等方面）； （三）質量管理手冊； （四）其他需要附加說明的資料。 第八條 省級質量技術監督部門在接到申請后，對申請單位的條件進行審核，在5個工作日內做出是否受理其申請的決定，并出具書面的受理或者不受理的意見。 已經受理的申請單位可以從事受理范圍內的試安裝改造工作，試安裝改造有效期為1年。由于大型電站鍋爐安裝改造工期較長，允許申請1級鍋爐安裝改造許可的單位經省級質量技術監督部門同意后可以延長試安裝改造有效期1年。 第九條 批準受理的單位應當從受理之日起，在試安裝改造有效期內約請鍋爐安裝改造鑒定評審機構（以下簡稱鑒定評審機構）對其進行鑒定評審，逾期不申請鑒定評審的，原受理批準自動失效。 鑒定評審機構應當按照本規則第二章規定，對安裝改造單位基本條件逐項審查，對施工技術資料和安裝改造質量進行現場審查，檢查質量管理體系運轉情況和鍋爐安裝改造質量及原始記錄、質量證明書等資料。 鑒定評審工作結束后，鑒定評審機構應當在30個工作日內向負責審批的省級質量技術監督部門（以下簡稱審批機關）提交鑒定評審報告。 第十條 審批機關應當在30個工作日內，對鑒定評審報告進行審核，并履行報批手續，符合條件的頒發相應級別的許可證。 第十一條 鍋爐安裝改造許可證書從簽發之日起4年內在全國范圍有效。 第十二條 安裝改造單位改變企業名稱、法人代表、主要技術負責人、登記地址或者停業等情形時，應當報請?jiān)l(fā)證機關辦理變更、備案或注銷許可手續。 第十三條 為保證許可證有效期的連續，申請換證的鍋爐安裝改造單位應在許可證有效期滿6個月以前，向原審批機關提出書面換證申請。除不需要進行試安裝改造外，換證程序與發證程序相同。許可證期滿未申請者，其許可資格自行作廢。 第四章 監督管理 第十四條 國家質檢總局和省級質量技術監督部門應當加強對鑒定評審機構監督管理，并且按照規定定期或者不定期的抽查鑒定評審機構的工作。 第十五條 安裝改造單位應當遵守以下規定： （一）不得超出許可范圍安裝改造鍋爐； （二）不得安裝改造由未取得相應鍋爐制造許可的單位制造的鍋爐產品； （三）不得安裝出廠資料不全或者未經監督檢驗合格的鍋爐產品（分期出廠的散裝鍋爐除外）； （四）不得改造未進行使用登記的鍋爐； （五）不得安裝未經定期檢驗合格的移裝鍋爐； （六）不得安裝改造報廢的鍋爐，或?qū)⒎浅袎哄仩t改造成為承壓鍋爐； （七）不得偽造、涂改、轉讓、出租和出借許可證； （八）不得將承接的鍋爐安裝改造工程轉包給其他無相應資格的單位。 第十六條 安裝改造單位在施工時應當履行以下義務： （一）在鍋爐安裝改造施工前，安裝改造單位應按照《條例》履行告知義務； （二）自覺接受當?shù)刭|(zhì)量技術監督部門的安全監察，積極配合鍋爐安裝改造監督檢驗機構（以下簡稱監督檢驗機構）按照《條例》和《鍋爐安裝改造監督檢驗規則》等安全技術規范的規定所實施的監督檢驗工作； （三）發現鍋爐受壓元（部）件存在影響安全的質量問題，應當停止施工，及時報告安裝地的質量技術監督部門，并在有關問題得到解決后方可繼續施工； （四）對安裝改造的施工質量負責，并及時做好有關鍋爐安裝改造質量的記錄工作，妥善保存鍋爐資料和見證材料，在竣工驗收后應當按照《條例》規定，在30日內將有關技術資料完整移交給鍋爐使用單位存檔。 第十七條 各級質量技術監督部門發現鍋爐安裝改造單位有違反《條例》、安全技術規范和本規則的行為時，應當立即予以制止并限期改正，情節嚴重的，建議發證機關暫停或撤銷其許可資格。