YY/T 1127-2006 Rongeur
1 Scope
This standard specifies the types and basic dimensions, materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage of rongeurs.
This standard is applicable to rongeurs for cutting or correcting bones.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding correction) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For any undated references, the latest edition of the normative document referred to applies.
GB/T 230.1 Metallic Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508.1:1999, MOD)
GB/T 1220 Stainless steel wires (GB/T 1220-1992, neq JIS G4303:1988)
GB/T 1910-1999 Newsprint
GB/T 2828.1 Sampling procedures for inspection by attributes - Part1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (GB/T 2828.1-2003; ISO 2859.1-1:1999, IDT)
GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
QB/T 1315-1991 Thick board
QB/T 3523 Ivory board
YY/T 0149-2006 Medical instruments of stainless steel - Test methods of corrosion resistance (ISO 13401:1995, MOD)
YY/T 1052 Marking requirements for surgical instruments
3 Types and basic dimensions, materials
3.1 The types and basic dimensions of rongeurs shall be in accordance with those specified in Figures 1 to 6 and Table 1.
Foreword II
1 Scope
2 Normative references
3 Types and basic dimensions, materials
4 Requirements
5 Test methods
6 Inspection rules
7 Marking
8 Packaging, transportation and storage
