1 Scope
This standard specifies the terms and definitions, requirements and test methods for the protection of the occupant in seat on outer side in front row in the event of a frontal collision for vehicle.
This standard is applicable to Type M1 motor vehicle, Type N1 motor vehicle with the maximum design total mass not greater than 2500kg and multipurpose goods vehicle.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3730.1 Motor Vehicles and Trailers - Types - Terms and Definitions
GB 14166 Safety-belts, Restraint Systems, Child Restraint Systems and ISOFIX Child Restraint Systems for Occupants of Power-driven Vehicles
GB 14167 Safety-belt anchorages, ISOFIX anchorages systems and ISOFIX top tether anchorages for vehicles
GB/T 15089 Classification of Power - Driven Vehicles and Trailers
GB/T 20913-2007 The Protection of the Occupants in the Event of an Off-set Frontal Collision for Passenger Car
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 20913-2007 and the following apply.
3.1
protective system
internal installed component and machine used for constraining occupants
3.2
type of protective system
protective machines which do not differ in such main respects as:
——manufacturing process technology;
——dimension;
——material.
3.3
angle of impact
the included angle between the straight line vertical to front face of barrier and the longitudinal heading direction line of vehicle
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Test Method
6 Change and Expansion of Vehicle Type
7 Requirements for Transition Period of Standard Implementation
Annex A (Normative) Determination Procedure of H Point in Seating Position and Actual Torso Angle
Annex B (Normative) Determination of Performance Criteria
Annex C (Normative) Arrangement of Manikin and Adjustment of Restraint System
Annex D (Normative) Testing Technology: Instrument
Annex E (Normative) Pulley Test Procedure
