標準編號:	GB/T 20913-2007
中文名稱:	乘用車正面偏置碰撞的乘員保護
英文名稱:	The protection of the occupants in the event of an off-set frontal collision for passenger car
中標分類:	T09    衛生、安全、勞動保護
行業分類:	GB    國家標準
ICS分類:	43.020 43.020    道路車輛綜合 43.020
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國家標準化管理委員會
發布日期:	2007-04-30
實施日期:	2007-12-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	40,000 字
翻譯價格(元):	550.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the technical requirements and test methods for the protection of the occupant in front outboard seat in the event of an off-set frontal collision for passenger car. It is applicable to power-driven vehicles of Category M1, of a total permissible design mass not exceeding 2,500kg; heavier vehicles of Category M1 and other category power-driven vehicles may refer to this standard. 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB 14166 Safety Belts and Restraint Systems for Adult Occupants of Motor Vehicles GB 14167 Safety-belt Anchorages for Vehicles ISO 209 Aluminium and Aluminium Alloys - Chemical Composition 3 Terms and Definitions For the purposes of this document, the following terms and definitions apply. 3.1 protective system interior installed fittings and devices intended to restrain the occupants and contribute towards ensuring compliance with the requirements set out in Chapter 4 3.2 type of protective system a category of protective devices which do not differ in such essential respects as: ——their manufacturing process technology; ——their geometry; ——their constituent material.

Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Instructions for Users of Vehicles Equipped with Airbags 6 Test Method 7 Modification and Extension of Approval of the Vehicle Type Annex A (Normative) Determination of Performance Criteria Annex B (Normative) Arrangement and Installation of Dummies and Adjustment of Restraint Systems Annex C (Normative) Procedure for Determining the "H" Point and the Actual Torso Angle for Seating Positions Annex D (Normative) Testing Technology: Instrument Annex F (Normative) Certification Procedure for the Dummy Lower Leg and Foot Annex G (Normative) Test Procedure with Trolley Annex H (Informative) Comparison of Clause Numbers in This Standard and Those in ECE R