標準編號:	GB 18176-2007
中文名稱:	輕便摩托車污染物排放限值及測量方法(工況法，中國第III階段)
英文名稱:	Limits and measurement methods for emissions of pollutants from mopeds on the running mode(CHINA stage Ⅲ)
中標分類:	Z64    流動污染源排放標準
行業分類:	GB    國家標準
ICS分類:	13.040.50 13.040.50    移動源排放限值 13.040.50
發布機構:	環境保護部
發布日期:	2007-4-25
實施日期:	2008-7-1
標準狀態:	superseded
被新標準替代:	GB 18176-2016 輕便摩托車污染物排放限值及測量方法（中國第四階段）
被替代日期:	2018-7-1
替代舊標準:	GB 18176-2002 輕便摩托車排氣污染物排放限值及測量方法(工況法)
翻譯語言:	英文
文件格式:	PDF
中文字符數:	32000 字
翻譯價格(元):	1500.0
交付時間:	付款后 1 個工作日

1 Application Scope This standard specifies the limits and measurement methods for emissions of exhaust pollutants from two-wheeled or three-wheeled mopeds on running mode, requirements for emission of pollutants from crankcase and durability requirements of pollution control device. This standard specifies the requirements of type approval, production conformity inspection and judgment method for two-wheeled and three-wheeled mopeds at Stage III. This standard is applicable to two-wheeled or three-wheeled mopeds which are equipped with spark-ignition engine and with the complete vehicle kerb mass not greater than 400kg, the engine displacement not greater than 50mL and the maximum design speed not greater than 50km/h. 2 Normative References The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these standards applies. GB/T 5359.5-1996 Term for Motorcycles and Mopeds - Mass of Vehicle with Two Wheels GB/T 5359.6-1996 Term for Motorcycles and Mopeds - Mass of Vehicle with Three Wheels GB/T 15089-2001 Classification of Power-driven Vehicles and Trailers 3 Terms and Definitions

Foreword i 1 Application Scope 2 Normative References 3 Terms and Definitions 4 Application and Approval of Type Approval 5 Technical Requirements 6 Type Approval Test and Emission Limits 7 Production Conformity Inspection 8 Type Approval Extension 9 Implementation of Standard Appendix A (Normative) Type Approval Application Information Appendix B (Normative) Format of Type Approval Certificate [Maximum Dimensions: A4 (210mm×297mm)] Appendix C (Normative) Measurement of Average Emissions of Exhaust Pollutants after Cold Start at Room Temperature (Type I Test) Appendix D (Normative) Durability Test of Pollution Control Device (Type V Test) Appendix E (Normative) Production Conformity Inspection Specification Appendix F (Normative) Technical Requirements of Reference Fuel