Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 24476-2009 Specification for data logging and monitoring for lifts, escalators and passenger conveyors. In addition to a number of editorial changes, the following main technical changes have been made with respect to GB/T 24476-2009:
——GB/T 26465-2011, GB/T 24479-2009, GB/T 15127-2008 and ISO 16484-5:2012, IETF RFC 2616, IETF RFC 6749 and IETF RFC 5246 are added in the normative references;
——Among the terms and definitions, enterprises application platform, installation running safety monitoring platform, protocol conversion device, acquisition and transmission device, monitoring terminal and registration number are added; monitoring device and in-site communicator are deleted; the definition of installation is revised, to adapt to the actual application condition in China and to facilitate the implementation of this standard;
——Clause 4 "Symbols and abbreviated terms" is added, in which data communication interface and protocol are introduced;
——Clause 5 "General requirements" is added, covering the specific requirements on" system architecture" as well as "installation and monitoring terminal";
——Clause 6 "Requirements on basic functions of enterprises application platform" is added to facilitate sending the data to the installation running safety monitoring platform in unified formats;
——In purpose of storage and transmission of data in unified formats, the following clauses are added: Clause 7 "Installation identification code and its format", Clause 8 "Basic installation information and its format", Clause 9 "Real-time running status and its format", Clause 10 "Statistics information and its format" and Clause 11 "Fault, event and alarm data and its format";
——Clause 4 "Data logging", Clause 5 "Monitoring and report" and Clause 6 "Hardware" in GB/T 24476-2009 are deleted;
——The fault and event codes in the code lists of Annex A (normative) are modified according to the requirements on lift running safety monitoring;
——Annex B (normative) BACnet data communication protocol of public output port is added to standardize data output format of installations;
——Annex C (informative) Representational state transfer web application programming interface (RESTful Web API) is added to standardize data interchange formats of platforms.
This Standard is proposed by and under the jurisdiction of SAC/TC 196 National Technical Committee on Elevators of Standardization Administration of China.
The previous edition of this standard is as:
——GB/T 24476-2009.
?
Introduction
0.1 The Internet of Things (IoT), a pioneering field to foster a new economic and social development model and reshape long-term competitiveness in a country, has been highly valued by China as a strategic emergent industry to be developed energetically. To promote the application and development in IoT is conducive to the transformation of the manufacturing, life and society management philosophy to intellectualization, refinement and networking, and it is of far-reaching importance to improve the informatization of national economy and social life and promote industrial restructuring and development mode transformation.
0.2 The technical specifications for the Internet of Things of lifts, escalators and moving walks shall be regulated and unified to 1) improve quality of products and service by industrial entities; 2) raise supervision efficiency; 3) enhance transparency of public supervision; and 4) improve users' degree of satisfaction. The significances above are embodied in the aspects below:
a) The quality of products and service is improved continually by acquisition and analysis of fault, running and statistics information of lifts;
b) Maintenance companies and users of lifts timely access the fault information of lifts and ask professional to rescue trapped passengers and remove faults on site.
c) Repair and maintenance units of lifts give supervision and technical supports to on-site repair and maintenance personnel to ensure that they could complete repair and maintenance tasks and emergency recovery in a timely and correct way;
d) It is convenient to build a unified supervision platform to achieve higher supervision efficiency;
e) The availability of unified standards contributes to decrease of overall industrial investment and social cost; based on the unified standards, lift makers will research and develop installation running safety monitoring systems of their own, which are conducive to ensuring reliability, utility and uniformity of such systems; and
f) The unified standards will facilitate the promotion of lift IoT technology at home and raise the standing of the Chinese lift industry in the global market.
Specification for internet of things for lifts, escalators and moving walks
1 Scope
This standard specifies the basic structure of the installation running safety monitoring platforms, the general output interface and protocol of monitoring terminals and enterprises application platforms for installations, the code format and output requirements of the installation data, etc. for internet of things (IoT) for lifts, escalators and moving walks.
This standard is applicable to new, rebuilt and extended installation running safety monitoring systems for internet of things for lifts, escalators and moving walks. This standard is not applicable to acquisition and transmission of audio, video, image and other signals.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 7588-2003 Safety rules for the construction and installation of electric lifts
GB/T 15127-2008 Information technology - Telecommunications and information exchange between systems - Twisted pair multipoint interconnections (ISO/IEC 8482:1993, IDT)
GB 16899-2011 Safety rules for the construction and installation of escalators and moving walks
GB 21240-2007 Safety rules for the construction and installation of hydraulic lifts
GB/T 24479-2009 Behavior of lifts in the event of fire
GB/T 26465-2011 Safety rules for the construction and installation of firefighters lifts
ISO 16484-5:2012 Building automation and control systems - Part 5: Data communication protocol
IETF RFC 2616 Hypertext Transfer Protocol HTTP/1.1
IETF RFC 5246 The Transport Layer Security (TLS) Protocol Version 1.2
IETF RFC 6749 Open Authorization 2.0 (OAuth 2.0)
?
3 Terms and definitions
For the purposes of this standard, the terms and definitions given in GB 7588-2003, GB 16899-2011, GB 21240-2007 and GB/T 26465-2011 and the following ones apply.
3.1
installation
lift, escalator or moving walk which has been installed and registered
3.2
enterprises application platform
remote installation safety monitoring application platform which is used to receive the fault, event and alarm data of the installation or inquire the real-time running status, statistics and other information (messages) of the installation
3.3
installation running safety monitoring platform
application platform of safety supervision and management on the installation built in purpose of safeguarding public safety, which can receive and inquire the data information specified by this standard through the enterprises application platform
3.4
fault
status of affecting or interrupting normal running of the installation
3.5
event
change of status, expected in the design, occurring in the running procedure of the installation
3.6
alarm
operation on the emergency alarm devices specified in GB 7588-2003 and GB 21240-2007
3.7
protocol conversion device
device which can input the real-time running status, fault, event or alarm information of the installation in the protocol format specified in this standard
?
3.8
acquisition and transmission device
device, connected with installation, protocol conversion device or additional sensor, which is used to collect, process, store and transmit the installation information including fault, event or alarm and receive the access, synchronization commands sent by an enterprise application platform, achieving network interaction between application platform and installation
3.9
monitoring terminal
general designation of protocol conversion device, additional sensor and acquisition/transmission device. Monitoring terminals may be integrated into the installations
3.10
installation running safety monitoring system
integrated system composed by installation, monitoring terminal, enterprises application platform and installation running safety monitoring platform via network
3.11
registration number
registration number that management department assign the installation in the registration process
4 Symbols and abbreviated terms
4.1 Symbols
The symbols are illustrated in the corresponding diagrams.
4.2 Abbreviated terms
For the purposes of this document, the following abbreviated terms apply.
BACnet: Building Automation and Control Networking
RS-485: a serial communication interface (RS represents the recommended standard, and 485 is the identification number)
BIBB: BACnet Interoperability Building Block
RESTful Web API: Representational State Transfer Web Application Programming Interface
5 General requirements
5.1 System architecture
5.1.1 The networking architecture of a lift installation running safety monitoring system is shown in Figure 1.
Foreword II
Introduction IV
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 General requirements
6 Requirements on basic functions of enterprises application platform
7 Installation identification number and its format
8 Basic installation information and its format
9 Real-time running status information and its format
10 Statistics information and its format
11 Fault, event and alarm data and its format
Annex A (Normative) List of codes
Annex B (Normative) BACnet data communication protocol of public output port
Annex C (Informative) Representational state transfer web application programming interface (RESTful Web API)
Bibliography
電梯、自動扶梯和自動人行道物聯網
的技術規范
1 范圍
本標準規定了電梯、自動扶梯和自動人行道物聯網的設備運行安全監管系統的基本構成，監測終端和企業應用平臺的公共輸出接口與協議，設備數據的代碼格式及輸出要求等。
本標準適用于電梯、自動扶梯和自動人行道物聯網的設備運行安全監測系統的新建、改建和擴建。本標準不適用于涉及音頻、視頻、圖像等信號的采集與傳輸。
2 規范性引用文件
下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。
GB 7588—2003電 梯制造與安裝安全規范
GB/T 15127—2008 信息技術 系統間遠程通信和信息交換 雙扭線多點互連(ISO/IEC 8482：1993，IDT)
GB 16899—2011 自動扶梯和自動人行道的制造與安裝安全規范
GB 21240—2007 液壓電梯制造與安裝安全規范
GB/T 24479—2009 火災情況下的電梯特性
GB/T 26465—2011 消防電梯制造與安裝安全規范
ISO 16484—5：2012 建筑自動化和控制系統 第5部分：數據通信協議(Building automation and control systems—Part 5：Data communication protocol)
IETF RFC 2616 超文本傳輸協議-HTTP/1.1(Hypertext Transfer Protocol HTTP/1.1)
IETF RFC 5246 傳輸層安全協議-1.2版[The Transport Layer Security (TLS) Protocol Version 1.2]
IETF RFC 6749 開放授權協議-OAuth 2.0(Open Authorization 2.0)
3 術語和定義
GB 7588—2003、GB 16899—2011、GB 21240—2007，GB/T 26465—2011界定的以及下列術語和定義適用于本文件。
3.1
設備 installation
安裝完畢并已注冊登記的電梯、自動扶梯或自動人行道。
3.2
企業應用平臺 enterprises application platform
設備遠程安全監測應用平臺，用于接收設備的故障、事件、報警數據或查詢設備實時運行狀態、統計信息等。
3.3
電梯運行安全監管平臺 installation running safety monitoring platform
以保障公共安全為目的所設立的對設備進行安全監督管理的應用平臺，通過企業應用平臺接收或查詢本標準規定的數據信息。
3.4
故障 fault
可能影響或中斷設備正常運行的狀態。
3.5
事件 event
設計中預計的在設備運行過程中發生的狀態變化。
3.6
報警 alarm
對GB 7588—2003和GB 21240—2007中規定的緊急報警裝置的操作。
3.7
協議轉換裝置 protocol conversion device
將設備實時運行狀態、故障、事件或報警等信息采用本標準規定的協議格式輸出的裝置。
3.8
采集傳輸裝置 acquisition and transmission device
與設備、協議轉換裝置或外加的傳感器連接，采集、處理、儲存和傳輸沒備故障、事件或報警等信息，接收企業應用平臺發送的訪問、同步指令，使應用平臺與設備間通過網絡實現交互的裝置。
3.9
監測終端 monitoring terminal
協議轉換裝置、外加的傳感器、集傳輸裝置的統稱。監測終端可以集成在設備中。
3.10
電梯運行安全監管系統 installation running safety monitoring system
由設備、監測終端、企業應用平臺、電梯運行安全監管平臺通過網絡連接組成的綜合系統。
3.11
設備注冊代碼 registration number
設備注冊登記時由管理部門給出的設備使用登記編號。
4 符號和縮略語
4.1 符號
符號在相應的圖表中解釋。
4.2 縮略語
下列縮略語適用于本文件。
BACnet：建筑自動化與控制網絡(Building Automation and Control networking)
RS-485：一種串行通信接口，RS(Recommended Standard)代表推薦標準，485是標識號
BIBB：建筑自動化與控制網絡互操作基本塊(BACnet Interoperability Building Block)
RESTful Web API：含狀態傳輸?shù)幕ヂ?lián)網服務應用編程接口(Representational State Transfer Web Application Programming Interface)
5 總體要求
5.1 系統架構
5.1.1 電梯運行安 全監管系統的組網架構見圖1。
安全監管平臺
電梯、自動扶梯、自動人行道運行安全監管平臺
Interne網絡
企業應用平臺
設備制造商應用平臺
企業應用平臺
無線/有線網絡
采量傳輸裝置
采集傳輸裝置
監測并端
設備
設備1……n
協議轉換裝置
設備……n
說明：
1——方式1：通過設備制造商應用平臺輸出數據的方式；
2——方式2：通過設備制造商提供的RS-485公共輸出端口輸出數據的方式；
3——界限：設備制造商數據輸出的界限。
圖1 電梯運行安全監管系統組網架構
5.1.2 設備應能通過監測終端向企業應用平臺提供附錄A所列設備的故障、事件、報警信息及其發生的時間和設備的實時運行狀態信息。
5.1.3 企業應用平臺應能向電梯運行安全監管平臺提供本標準規定的信息。
5.1.4 設備制造商應通過設備制造商應用平臺向電梯運行安全監管平臺提供本標準規定的信息，或者設置符合5.2規定的類型為RS-485的公共輸出端口。
5.2 設備和監測終端
5.2.1 監測終端應與設備之間采取隔離措施，監測終端不能影響設備的正常運行。
5.2.2 RS-485(見GB/T 15127—2008)公共輸出端口應輸出附錄B規定的數據，不接受任何外部對設備的控制指令。
5.2.3 如果為非設備制造商提供的監測終端，其電源應取自設備供電電源開關的前端。
5.2.4 當采用外加的傳感器時應與設備本身的電氣線路無任何連接。外加的傳感器不應影響設備原有的功能及運行安全。外加的傳感器應符合該設備應用場合對傳感器的要求(如消防電梯、防爆電梯等)。
5.2.5 設備實時運行狀態信息、統計信息和故障、事件、報警記錄的時間和日期應以企業應用平臺為基準。監測終端的內部時鐘應定期與企業應用平臺的時鐘進行同步，企業應用平臺輸出至電梯運行安全監管平臺的時間以北京時間為準。
5.2.6 監測終端應配備備用電源，在其正常供電電源斷電的情況下，應保證能正常工作至少1h。
5.2.7 設備的故障，事件、報警信息應實時向企業應用平臺發送，發出信息時間不大于1s。
5.2.8 設備的實時運行狀態信息(見表3)和統計信息(見表4)僅接受企業應用平臺的查詢，實時運行狀態信息的發送間隔不大于1s。
5.2.9 監測終端應能至少保存最近100條記錄，所存儲的記錄應包括附錄A所列設備的故障、事件、報警信息及其發生的時間和設備的實時運行狀態信息。
5.2.10 監測終端與企業應用平臺之間的數據傳輸和存儲宜有安全策略，對數據進行加密，對數據的遠程讀取應有權限管理等。
5.2.11 監測終端采用電信通信裝置時，應符合國家對電信通信裝置的相關規定，如通信單元等領取得進網許可證、CCC認證等。
6 企業應用平臺基本功能要求
5.1 企業應用平臺應能正確接收設備的故障、事件、報警信息、統計信息和實時運行狀態信息，向電梯運行安全監管平臺提供本標準規定的信息。
6.2 企業應用平臺應能查詢本標準規定的設備信息。
6.3 企業應用平臺應能對設備基礎信息(見表2)進行維護。
6.4 企業應用平臺與電梯運行安全監管平臺之間的數據交換應采用RESTful Web API(參見附錄C)。
6.5 企業應用平臺應能及時監測設備的在線狀態。
6.6 企業應用平臺可隨時接受電梯運行安全監管平臺的訪問，提供本標準規定的信息。
6.7 企業應用平臺與電梯運行安全監管平臺之間的數據傳輸和存儲應有安全策略，如對數據進行加密、對數據的遠程讀取應有權限管理等。
7 設備識別碼與格式
企業應用平臺應通過設備識別碼對每臺設備進行識別。此唯一識別碼由企業自定義且應與設備注冊代碼關聯，見表1。
表1 設備識別代碼
屬性標識符 屬性數據類型 特征 數據范圍/單位 備注
設備識別碼
Identification Number String R 設備識別碼，最多20個字符 為企業定義的設備的唯一識別碼
注：R表示屬性必需，且服務可讀。
8 設備基礎信息與格式
企業應用平臺應在后臺配置設備基礎信息并與設備識別碼進行關聯。設備基礎信息及其定義見表2。
表2 設備基礎信息與格式
屬性標識符 定義 數據范圍/單位/示例
設備出廠編號 設備產品合格證上標示的設備編號 —
設備注冊代碼 設備注冊登記時由管理部門給出的設備使用登記編號 字符串，最多20個字符
設備品種 設備按照其基本屬性對應的分類所列代碼進行編碼注：編碼參見質檢總局關于修訂《特種設備目錄》的公告(2014年第114號) 3110：曳引驅動乘客電梯
3310：自動扶梯
3420：消防員電梯.......
設備型號 由設備制造商定義的產品型號 —
設備安裝地址 設備實際安裝地址 某市某路某號某幢某單元
設備內部編號 由設備使用單位賦予設備的編號 如：1號梯、3號樓2號梯......
設備制造商 設備制造商的名稱 —
進口設備代理商 進口設備在中國境內的代理機構(如有) —
設備出廠日期 設備產品合格證上標示的日期 YYYY.MM.DD
設備改造單位 設備改造單位的名稱 —
設備改造日期 設備的監督檢驗報告上的檢驗日期 YYYY.MM.DD
設備安裝單位 設備安裝單位的名稱 —
設備安裝日期 設備的監督檢驗報告上的檢驗日期 YYYY.MM.DD
維護保養單位名稱 設備日常維護保養單位的名稱 —
應急求援電話 設備使用單位或維保單位應急救援的值班電話 —
使用單位名稱 設備使用單位的名稱 —
電梯 層站數 電梯物理層站數 層/站
額定速度 電梯設計所規定的轎廂運行速度 m/s
額定載重量 電梯設計所規定的轎廂載重量 Kg
顯示樓層 電梯的物理樓層在轎廂內的顯示樓層 —
自動扶梯 名義速度 由制造商設計確定的，自動扶梯的梯級在空載情況下的運行速度 m/s
提升高度 自動扶梯進出口兩樓層板之間的垂直距離 m
傾斜角 梯級運行方向與水平面構成的最大角度 度
名義寬度 對于自動扶梯設定的一個理論上的寬度值。一般指自
動扶梯梯級安裝后橫向測量的踏面長度 m
自動人行道 名義速度 由制造商設計確定的，自動人行道的踏板或膠帶在空載情況下的運行速度 m/s
使用區段長度 指沿自動人行道梯路方向，從桁架首端至末端之間的折線距離 m
傾斜角 踏板或膠帶運行方向與水平面構成的最大角度 度
名義寬度 對于自動人行道設定的一個理論，上的寬度值。一般指自動人行道踏板安裝后橫向測量的踏面長度 m
9 設備實時運行狀態信息與格式
9.1 設備實時運行狀態信息應包含：設備識別碼和設備實時運行狀態信息。
9.2 設備實時運行狀態信息的具體內容和符合ISO 16484-5：2012規定的BACnet協議的數據類型、特征、數據范圍等見表3。
表3 設備實時運行狀態信息與格式
屬性標識符 屬性數據類型 特征 數據范圍/單位 備注
數據生成時間
Time _ Stamps BACnetDateTime W YYYY.MM.DD
HH.MM.SS 監測終端的當前時間
電梯 當前服務模式Service _ Mode BACnetLiftService _ Mode R 0：停止服務
1：正常運行
2：檢修
3：消防返回
4：消防員運行
5：應急電源運行
6：地震模式
7：未知 檢修的優先級最高，電梯在檢修狀態中，應不輸出所有故障、事件和報警
轎廂運行狀態Car _ Status Multi state R 0：停止
1：運行 轎廂實際狀態，停止即待機或斷電
轎廂運行方向Car _ Direction Multi state R 0：無方向
1：上行
2：下行 轎廂實際運行狀態，非轎廂內指示方向
開鎖區域
Door _ Zone Boolean R True：轎廂在開鎖區域
False：轎廂在非開鎖區域 轎廂是否在開鎖區域，僅電梯停止時有效
電梯當前樓層
Car _ Position Unsigned R — 電梯物理樓層位置
關門到位
Door _ Status Boolean R True：關門到位
False：無關門到位信號 關門：關門到位
開門：無關門到位信號
轎內是否有人
Passenger _ Status Boolean R True：有人
False：無人 判斷轎廂內是否有人的方式由廠家自定義
自動
扶梯
和自
動人
行道 當前服務模式
Service _ Mode BACnetEscala _ torServiceMode R 0：停止運行
1：正常運行
2：檢修
3：未知 進人檢修狀態后，所有故障不報
運行狀態
Operation _ Status Multi state R 0：停止
1：運行 實際狀態，停止指待機或停止運行
運行方向
Operation _ Direction Multi state R 0：無方向
1：上行
2：下行 實際狀態
注：R表示屬性必需，且服務可讀；
W表示屬性必需，且服務可讀、可寫。
10 設備統計信息與格式
10.1 設備統計信息應包含：設備識別碼和設備統計信息。
10.2 設備統計信息的具體內容和符合ISO 16484-5：2012規定的BACnet協議的數據類型、特征、數據范圍等見表4。
表4 設備統計信息與格式
屬性標識符 屬性數據類型 特征 數據范圍/單位 備注
設備累計運行時間Total-Running _ Time Unsigned32 R 小時 設備處于運動狀態的時間，為設備累計值
設備累計運行次數Present _ Counter _ Value Unsigned32 R — 設備由停止?fàn)顟B(tài)變?yōu)檫\動狀態的次數，為設備累計值
注：R表示屬性必需，且服務可讀。
11 故障、事件和報警數據與格式。
11.1 設備故障、事件和報警信息應包含：設備實時運行狀態信息和故障、事件、報警信息。
11.2 應根據表A.1~表A.6所列的相應代碼和發生的日期、時間識別監測終端記錄的設備實時運行狀態信息和故障、事件和報警信息。設備的一個故障或事件可能導致多個代碼被記錄，見表5。
11.3 設備在進人檢修狀態后，監測終端應不輸出故障、事件和報警。
