標準編號:	GB/T 34012-2017
中文名稱:	通風系統用空氣凈化裝置
英文名稱:	Air cleaner for ventilation system
中標分類:	P48    通風、空調工程
行業分類:	GB    國家標準
ICS分類:	91.140.30 91.140.30    通風和空調系統 91.140.30
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2017-07-12
實施日期:	2018-6-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	20000 字
翻譯價格(元):	420.0
交付時間:	付款后 1 個工作日

SAC/TC 143 is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. This standard is developed in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by Ministry of Housing and Urban-Rural Development of the People's Republic of China (MOHURD). This standard is under the jurisdiction of SAC/TC 143 National Technical Committee on Heating Ventilating and Air Conditioning of Standardization Administration of China. Air Cleaner for Ventilation System 1 Scope This standard specifies terms and definitions, classification and mark, general requirements, requirements, test methods, inspection rules as well as marking, packaging, transport and storage of air cleaner for ventilation system. This standard is applicable to production and inspection of air cleaner used for ventilation and air conditioning systems. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 191 Packaging - Pictorial Marking for Handling of Goods GB/T 1019 General Requirements for the Package of Household and similar Electrical Appliances GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection GB 4706.1 Household and Similar Electrical Appliances - Safety - Part 1: General Requirements GB 4706.45 Household and Similar Electrical Appliances - Safety - Particular Requirements for Air-cleaning Appliances GB/T 13306 Plates GB/T 13554 High Efficiency Particulate Air Filter GB/T 14295 Air Filters GB/T 18883 Indoor Air Quality Standard GB/T 21087 Air-to-air Energy Recovery Equipment GB 21551.3 Antibacterial and Cleaning Function for Household and Similar Electrical Appliances - Particular Requirements of Air Cleaner GB 50243 Code of Acceptance for Construction Quality of Ventilation and Air Conditioning Works JJG 846 Dust Concentration Measuring Meter WS/T 367 Regulation of Disinfection Technique in Healthcare Settings Ministry of Health P.R China Regulation of Disinfection Technique (2002) 3 Terms and Definitions For the purposes of this document, the following terms and definitions apply. 3.1 air cleaner for ventilation system device that is possessed of a certain capacity to remove air pollutants in the air from ventilation system 3.2 air pollutants substance in the air which has harmful influence on human body or environment, including particulate matters, gaseous pollutants, microorganism and other pollutants 3.3 inhalable particulate matter (PM10) particulate matter in ambient air whose aerodynamic equivalent diameter is less than or equal to 10μm 3.4 fine particulate matter (PM2.5) particulate matter in ambient air whose aerodynamic equivalent diameter is less than or equal to 2.5μm 3.5 rated air flow air flow designed to be treated by air cleaner in unit time in the specified state 3.6 cleaning efficiency capacity of air cleaner for removing air pollutant passing the air cleaner by once at rated air flow, i.e. the ratio of the concentration difference between pollutants in the air at inlet and those at outlet of the air cleaner to the concentration of pollutant in the air at inlet 3.7 initial resistance static pressure loss of non-powered air cleaner operating at rated air flow in initial state 3.8 final resistance specified resistance value of air cleaner raised and reached due to standard synthetic dust collection at rated air flow, which is the index used to characterize the performance of isolated non-powered air cleaner 3.9 dust holding capacity total mass of standard synthetic dust collected by air cleaner reaching final resistance at rated air flow, which is the index used to characterize the performance of isolated non-powered air cleaner 3.10 rated power input power of air cleaner working at rated air flow and wind pressure in initial state 3.11 cleaning energy efficiency ratio of clean ventilation quantity to rated power when powered air cleaner operates at rated air flow and wind pressure Note: clean ventilation quantity is the product of rated air flow and cleaning efficiency. 4 Classification and Mark 4.1 Classification 4.1.1 Classified by object it acts on Air cleaner may be classified, by object on which it acts, into particulate matter type, gaseous pollutant type and microorganism type, with the codes of KL, QT and WS respectively. 4.1.2 Classified by cleaning efficiency 4.1.2.1 Air cleaner may be classified by the efficiency for cleaning the particulate matters into Grade A, Grade B, Grade C and Grade D air cleaners, with the efficiency of Grade A air cleaner being highest. 4.1.2.2 Air cleaner may be classified by the efficiency for cleaning the gaseous pollutants into Grade A, Grade B and Grade C air cleaners, with the efficiency of Grade A air cleaner being highest. 4.1.2.3 Air cleaner may be classified by the efficiency for cleaning the microorganism into Grade A, Grade B, Grade C and Grade D air cleaners, with the efficiency of Grade A air cleaner being highest. 4.1.3 Classified by whether it possesses fan Air cleaner may be classified by whether it is with self-contained fan into non-powered and powered air cleaners, with the codes of WD and YD respectively. 4.2 Mark Air cleaner shall be marked as follows: Example 1: Non-powered particulate matter type air cleaner with cleaning efficiency of Grade A and rated air flow of 1,500 m3/h is marked as TKJ-(KL-A)-1500-WD. Example 2: Powered gaseous pollutant type air cleaner with cleaning efficiency of Grade B and rated air flow of 1,000 m3/h is marked as TKJ-(QT-B)-1000-YD. Example 3: Combined non-powered air cleaner with PM cleaning efficiency of Grade A, gaseous pollutant cleaning efficiency of Grade B, microorganism cleaning efficiency of Grade C and rated air flow of 1,500m3/h is marked as TKJ-(KL-A/QT-B/WS-C)-1500-WD. 5 General Requirements 5.1 Basic requirements 5.1.1 As for air cleaner, the rated voltage of single phase shall not be greater than 250 V, the rated voltage of three phases shall not be greater than 480 V and rated frequency shall be 50Hz. 5.1.2 As for air cleaner, power-off protection measures shall be taken to ensure the internal devices are powered off when the device is opened for repair or maintenance. 5.1.3 The electrical shock protection of air cleaner shall meet the relevant requirements of GB 4706.1. 5.1.4 The environmental protection and fireproof performances of air cleaner shall meet the requirements of the environment in which it is used. 5.2 Material Filtering material, binder, sealant, sealing gasket, protective net, frame and the like adopted for air cleaner shall meet the relevant requirements of GB/T 14295 and GB/T 13554. 5.3 Structure 5.3.1 Frame or support shall possess sufficient strength and rigidity and be able to withstand weight and pressure caused by installation, operation or repair. 5.3.2 Sealing shall be carried out between frame and device module as well as between modules. 5.3.3 It shall be convenient to disassemble and assemble the parts of air cleaner which are cleanable and replaceable. 6 Requirements 6.1 Appearance 6.1.1 The surface of air cleaner shall be smooth and clean, without scratch, rust stain, indentation or damage. 6.1.2 The sprayed coating shall be uniform, without flow mark, bubble or scaling. 6.1.3 Parts shall be fastened without looseness; components like filtering material, divider, protective net, etc. shall be free from deformation; sealing gasket shall not get loose. 6.1.4 Frame or support shall not be concavo convex, twisted or damaged, and its appearance shall be intact. 6.1.5 Text as well as graphic symbol mark stating the functions shall be correct, legible, upright and firm. 6.1.6 Electrical safety warning and electric terminal wiring diagram shall be indicated on the device enclosure. 6.2 Cleaning efficiency The efficiency of air cleaner for cleaning air pollutants at rated air flow in initial state shall be in accordance with those specified in Table l, and the measured value shall not be less than 95% of the nominal value.

Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Classification and Mark 5 General Requirements 6 Requirements 7 Testing Methods 8 Inspection Rules 9 Marking, Packaging, Transport and Storage Annex A (Normative) Test Methods for PM2.5 Cleaning Efficiency Annex B (Informative) Test Methods for PM 2.5 Cleaning Effect of Air Cleaner at Project Site Annex C (Normative) Test Methods for Gaseous Pollutants Cleaning Efficiency Annex D (Normative) Test Method for Microorganism Cleaning Efficiency Annex E (Normative) Test Method for Ozone Concentration Increment and Ultraviolet Leakage Quantity

ICS 91.140.30 P 48 中華人民共和國國家標準 GB/T 34012—2017 通風系統用空氣凈化裝置 Air cleaner for ventilation system 2017-07-12發布 2018-06-01實施 中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會 發布 前言 本標準按照GB/T 1.1—2009給出的規則起草。 本標準由中華人民共和國住房和城鄉建設部提出。 本標準由全國暖通空調及凈化設備標準化技術委員會(SAC/TC 143)歸口。 本標準負責起草單位：中國建筑科學研究院。 本標準參加起草單位：清華大學、上海市建筑科學研究院(集團)有限公司、中國疾病預防控制中心環境與健康相關產品安全所、北京建筑大學、重慶大學、廣東省微生物研究所、北京城建設計發展集團股份有限公司、浙江曼瑞德環境技術股份有限公司、大金(中國)投資有限公司上海分公司、南通恒嘉環保科技有限公司、廣東松下環境系統有限公司、上海蘭舍空氣技術有限公司、深圳市電精科技有限公司、科德寶·寶翎無紡布(蘇州)有限公司、珠海格力電器股份有限公司、廣東申菱環境系統股份有限公司、江蘇風神空調集團股份有限公司、煙臺寶源凈化有限公司、遠大潔凈空氣科技有限公司、賀氏(蘇州)特殊材料有限公司、寧波東大空調設備有限公司、美埃(中國)環境凈化有限公司、江森自控樓宇設備科技(無錫)有限公司、安徽賓肯電氣有限公司、北京恒通綠建節能科技有限公司、北京環都人工環境科技有限公司、北京亞都環保科技有限公司、德州艾荷過濾設備有限公司、上海勝潔空氣凈化設備有限公司、東莞市宇潔新材料有限公司、寧波艾普羅環保科技有限公司、愛芯環保科技(廈門)股份有限公司、山西新華化工有限責任公司、愛迪士(上海)室內空氣技術有限公司、愛優特空氣技術(上海)有限公司、深圳澤風凈化設備有限公司、重慶海潤節能技術股份有限公司。 本標準主要起草人：路賓、孫峙峰、徐昭煒、馮昕、張寅平、李景廣、呂錫芳、高巖、丁勇、謝小保、張良焊、曹國慶、李劍東、張彥國、王志勇、孟沖、石瑩、陳巍、張建強、倪棕、章佳榮、朱偉、宋昆華、張曉俊、劉煜、潘展華、丁歡慶、楊云濤、胡杰、肖軼群、邵安春、陳玲、祁飛、王飛、齊政新、孟東暉、劉東方、張勇、楊全輝、王寶柱、孔盛、鐘喜生、史洪濤、駱千莎、楊浩、張國慶、劉新海、宋波。 通風系統用空氣凈化裝置 1范圍 本標準規定了通風系統用空氣凈化裝置的術語和定義、分類與標記、一般要求、要求、試驗方法、檢驗規則及標志、包裝、運輸和貯存。 本標準適用于通風和空調系統用空氣凈化裝置的生產和檢驗。 2規范性引用文件 下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。 GB/T 191包裝儲運圖示標志 GB/T 1019家用和類似用途電器包裝通則 GB/T 2828.1計數抽樣檢驗程序 第1部分：按接收質量限(AQL)檢索的逐批檢驗抽樣計劃 GB 4706.1家用及類似用途電器的安全 第1部分：通用要求 GB 4706.45家用及類似用途電器的安全 空氣凈化器的特殊要求 GB/T 13306標牌 GB/T 13554高效空氣過濾器 GB/T 14295空氣過濾器 GB/T 18883室內空氣質量標準 GB/T 21087空氣-空氣能量回收裝置 GB 21551.3家用和類似用途電器的抗菌、除菌、凈化功能空氣凈化器的特殊要求 GB 50243通風與空調工程施工質量驗收規范 JJG 846粉塵濃度測量儀 WS/T 367 醫療機構消毒技術規范 消毒技術規范(2002)中華人民共和國衛生部 3術語和定義 下列術語和定義適用于本文件。 3.1 通風系統用空氣凈化裝置 air cleaner for ventilation system 對通風系統空氣中的空氣污染物具有一定去除能力的裝置。 3.2 空氣污染物 air pollutants 空氣中對人體或環境產生有害影響的物質。包括顆粒物、氣態污染物、微生物等污染物。 3.3 可吸入顆粒物(粒徑小于或等于10 μm)inhalable particulate matter(PM10) 環境空氣中空氣動力學當量直徑小于或等于10 μm的顆粒物。 3.4 細顆粒物(粒徑小于或等于2.5μm)fine particulate matter(PM2.5) 環境空氣中空氣動力學當量直徑小于或等于2.5μm的顆粒物。 3.5 額定風量 rated air flow 在規定狀態下，空氣凈化裝置單位時間內設計處理的風量。 3.6 凈化效率 cleaning efficiency 空氣凈化裝置在額定風量下，對空氣污染物的一次通過去除能力。即空氣凈化裝置入口、出口空氣中污染物濃度之差與入口空氣中污染物濃度之比。 3.7 初阻力 initial resistance 初始狀態下，無動力型空氣凈化裝置在額定風量下運行時，空氣凈化裝置的靜壓損失。 3.8 終阻力 final resistance 在額定風量下，空氣凈化裝置由于捕集標準人工塵而使其阻力上升并達到的規定值。表征阻隔式無動力型空氣凈化裝置性能的指標。 3.9 容塵量dust holding capacity 在額定風量下，空氣凈化裝置達到終阻力時所捕集的標準人工塵總質量。表征阻隔式無動力型空氣凈化裝置性能的指標。 3.10 額定功率rated power 初始狀態下，空氣凈化裝置在額定風量、風壓下工作時的輸入功率。 3.11 凈化能效 cleaning energy efficiency 有動力型空氣凈化裝置在額定風量、風壓下工作時，潔凈通風量與額定功率之比。 注：潔凈通風量為額定風量與凈化效率的乘積。 4分類與標記 4.1分類 4.1.1按作用對象分類 空氣凈化裝置按作用對象分類，可分為顆粒物型、氣態污染物型和微生物型，代號分別為KL、QT、WS。 4.1.2按凈化效率分類 4.1.2.1 按空氣凈化裝置對顆粒物的凈化效率分類，可分為A級、B級、C級和D級，A級最高。 4.1.2.2按空氣凈化裝置對氣態污染物的凈化效率分類，可分為A級、B級和C級，A級最高。 4.1.2.3按空氣凈化裝置對微生物的凈化效率分類，可分為A級、B級、C級和D級，A級最高。 4.1.3按有無風機分類 空氣凈化裝置按有無自帶風機分類，可分為無動力型和有動力型，代號分別為WD和YD。 4.2標記 空氣凈化裝置的標記方式如下： 動力類型代號 額定風量，m3/h 凈化效率代號 作用對象代號 產品代號(TKJ，T、K和J分別代表 通風系統用、空氣和凈化裝置) 示例1： 凈化效率A級，額定風量為1 500 m3/h的無動力型顆粒物型空氣凈化裝置，其標記為：TKJ-(KL-A)-1500-WD。 示例2： 凈化效率B級，額定風量為1 000 m3/h的有動力型氣態污染物型空氣凈化裝置，其標記為：TKJ-(QT-B)-1000-YD。 示例3： 顆粒物凈化效率A級，氣態污染物凈化效率B級。微生物凈化效率C級，額定風量1 500m3/h的無動力型復合型空氣凈化裝置，其標記為：TKJ-(KL-A/QT-B/WS-C)-1500-WD。 5一般要求 5.1基本規定 5.1.1 空氣凈化裝置單相額定電壓不應大于250 V，三相額定電壓不應大于480 V，額定頻率應為50 Hz。 5.1.2空氣凈化裝置應設置斷電保護措施，保證在打開裝置進行維修或維護時，其內部裝置能夠斷電。 5.1.3 空氣凈化裝置防觸電保護應符合GB 4706.1的有關規定。 5.1.4空氣凈化裝置環保及防火性能應符合所應用環境的要求。 5.2材料 空氣凈化裝置中采用的濾料、粘結劑、密封膠、密封墊、防護網和邊框等材料應符合GB/T 14295和GB/T 13554的有關規定。 5.3結構 5.3.1框架或支撐體應有足夠的強度和剛度，應能承受安裝、運行和維修時所需重量和壓力。 5.3.2框架與裝置模塊之間、模塊與模塊之間應密封。 5.3.3空氣凈化裝置的可清潔、可更換部件應拆裝方便。 6要求 6.1外觀 6.1.1空氣凈化裝置表面應光潔平整，無劃痕、銹斑、壓痕和損傷。 6.1.2噴涂層應均勻，無流痕、氣泡和剝落現象。 6.1.3零部件應緊固、無松動，濾料、分隔物、防護網等部件不應變形，密封墊不應松脫。 6.1.4框架、支撐體等材料不應凹凸、扭曲或破損，外形應完好。 6.1.5說明功能的文字和圖形符號標志應正確、清晰、端正、牢固。 6.1.6裝置外殼應標明電氣安全警示及電氣端子接線圖。 6.2凈化效率 初始狀態下，空氣凈化裝置額定風量時對空氣污染物的凈化效率應符合表l的規定，且實測值不應小于標稱值的95％。 表1 空氣凈化裝置額定風量下各種空氣污染物的凈化效率 ％ 類型 凈化效率等級 PM2.5凈化效率 氣態污染物凈化效率 微生物凈化效率 顆粒物型 A EPM2.5>90 — — B 7060 — B — 4090 B — — 70