標準編號:	GB/T 38097-2019
中文名稱:	城鎮供熱 玻璃纖維增強塑料外護層聚氨酯泡沫塑料預制直埋保溫管及管件
英文名稱:	Urban heating—Prefabricated directly buried insulating pipes and fittings with polyurethane(PUR)foamed-plastics and glass fiber reinforced plastics protect layers
中標分類:	P46    供熱、采暖工程
行業分類:	GB    國家標準
ICS分類:	91.140.10 91.140.10    中央供熱系統 91.140.10
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2019-10-18
實施日期:	2020-9-1
標準狀態:	to be valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	21000 字
翻譯價格(元):	1470.0
交付時間:	付款后 1 個工作日

GB/T 38097-2019 Urban heating - Prefabricated directly buried insulating pipes and fittings with polyurethane (PUR) foamed-plastics and glass fiber reinforced plastics protect layers 1 Scope This standard specifies the terms and definitions, construction, requirements, test methods, inspection rules, marking, transportation and storage of prefabricated directly buried insulating pipes and fittings with polyurethane (PUR) foamed-plastics and glass fiber reinforced plastics protect layers. This standard is applicable to the prefabricated directly buried insulating pipes and fittings whose conveying medium temperature (long-term operating temperature) is not higher than 120 °C and accidental peak temperature is not higher than 140 °C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 3091 Welded steel pipes for low pressure liquid delivery GB/T 8163 Seamless steel tubes for liquid service GB/T 8237 Liquid unsaturated polyester resin for fiber reinforced plastics GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous GB/T 9711 Petroleum and natural gas industries - Steel pipe for pipeline transportation systems GB/T 12459 Steel buttwelding pipe fittings - Types and parameter GB/T 13401 Steel buttwelding pipe fittings - Technical specification GB/T 18369 Glass fiber roving GB/T 18370 Glass fibre woven roving GB/T 29046-2012 Test methods of technical specification for pre-insulated directly buried district heating pipes GB/T 29047-2012 Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-plastics and high density polyethylene casing pipes GB 50236 Code for construction of field equipment, industrial pipe welding engineering CJJ/T 254 Technical specification for leakage surveillance system of directly buried heating pipe NB/T 47013.2 Nondestructive testing of pressure equipment - Part 2: Radiographic testing NB/T 47013.3 Nondestructive testing of pressure equipment - Part 3: Ultrasonic testing NB/T 47014 Welding procedure qualification for pressure equipment SY/T 5257 Steel bends for oil and gas transmission 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 29047-2012 and the following apply. 3.1 long term mechanical properties of casing long-term aging resistance of the casing material assessed based on the time of brittle failure of the material under the accelerated test condition at certain stress, temperature and medium environment 3.2 bend angle deviation difference between the nominal bend angle of elbow or bend and the measured bend angle of product 4 Construction 4.1 Prefabricated directly buried insulating pipes with polyurethane (PUR) foamed-plastics and glass fiber reinforced plastics protect layers (hereinafter referred to as "insulating pipes") or insulating fittings shall be of a trinity structure in which working steel pipes or steel pipe fittings, insulating layers and protect layers are closely fitted, and trestles and alarm lines can be set in the insulating layers.

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Construction 5 Requirements 5.1 Working steel pipe 5.2 Steel pipe fittings 5.3 Protect layer 5.4 Insulating layer 5.5 Insulating pipe 5.6 Insulating pipe fittings 5.7 Insulating joint 6 Test methods 7 Inspection rules 7.1 End-of-manufacturing inspection 7.2 Type inspection 8 Marking, transportation and storage 8.1 Marking 8.2 Transportation 8.3 Storage Annex A (Normative) Manufacture of insulating joint Annex B (Normative) Test method for Barcol hardness of protect layer Bibliography