標準編號:	GB/T 6893-2010
中文名稱:	鋁及鋁合金拉（軋）制無縫管
英文名稱:	Aluminium and aluminium alloys cold drawn(rolled) seamless tubes
中標分類:	H61    輕金屬及其合金
行業分類:	GB    國家標準
ICS分類:	77.150.10 77.150.10    鋁產品 77.150.10
發布機構:	國家標準化委員會 國家質量監督檢驗檢疫總局
發布日期:	2011-1-14
實施日期:	2011-11-1
標準狀態:	superseded
被新標準替代:	GB/T 6893-2022 鋁及鋁合金拉（軋）制管材
被替代日期:	2022-10-1
替代舊標準:	GB/T 6893-2000 鋁及鋁合金拉（軋）制無縫管
翻譯語言:	英文
文件格式:	PDF
中文字符數:	10000 字
翻譯價格(元):	340.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage and quality certificate as well as contract (or order form) contents of aluminium and aluminium alloys cold drawn (rolled) seamless tubes (hereinafter referred to as “tubes”) used for general industry. This standard is applicable to the tubes with an outer diameter of not greater than 120.00mm. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 228 Metallic materials - Tensile testing at ambient temperature GB/T 3190 Chemical composition of wrought aluminium and aluminium alloys GB/T 3199 Wrought aluminium and aluminium alloy products - Packing marking transporting and storing GB/T 3246.1 Inspection method for structure of wrought aluminum and aluminum alloy products - Part 1: Inspection method for microstructure GB/T 4436 Wrought aluminum and aluminum alloy tubes - Dimensions and deviations GB/T 5126 Eddy current inspection method for cold drawn thin wall tubes of aluminum and aluminum alloy GB/T 7999 Optical emission spectrometric analysis method of aluminum and aluminum alloys GB/T 16865 Test pieces for tensile test for wrought aluminum and magnesium alloy products GB/T 17432 Methods for sampling for analyzing the chemical composition of wrought aluminum and aluminum alloys GB/T 20975 (All parts) Methods for chemical analysis of aluminium and aluminium alloys ? 3 Requirements 3.1 Product classification 3.1.1 Designation and state Designation and state shall meet those specified in Table 1. Other designations or states required by the purchaser shall be determined through negotiation between the supplier and the purchaser, and shall be indicated in the contract (or order form).

Foreword i 1 Scope 2 Normative references 3 Requirements 4 Test methods 5 Inspection rules 6 Marking, packaging, transportation, storage and quality certificate 7 Contract (or order form) contents