Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is drafted in accordance with the rules of GB/T 1.1-2009.
This standard supersedes SJ/T 11364 - 2006 Marking for Control of Pollution Caused by Electronic Information Products which will be abolished from the issuance date thereof.
Compared with SJ/T 11364 - 2006, this standard has the following main changes:
a) As for the standard name and scope, the "electronic information products" of SJ/T 11364 - 2006 is adjusted to "electrical and electronic product"; "control of pollution" is adjusted to "restriction of the use of hazardous substances";
b) The content indicating that the logistics process may refer to is added (see Chapter 1);
c) In normative references, a standard of GB 18455 Package Recycling Marking (see Chapter 2 of SJ/T 11364 - 2006) is deleted.
d) In terms and definitions, "electrical and electronic product", hazardous substance" and "logistic" (see 3.1, 3.2 and 3.7) are added while those about "electronic information products", "hazardous substance", "producer", "importer" and "packing material" (see 3.1, 3.2, 3.4, 3.5 and 3.7 of SJ/T 11364-2006) are deleted;
e) The requirements for electrical and electronic product with display function which is allowed to use digital slogan are added (see 6.1.3);
f) The requirements for name marking of packing materials are deleted (see Chapter 9 of SJ/T 11364 - 2006).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. Issuing authority of this document shall not be held responsible for identifying any or all such patent rights.
This standard is proposed by Standards Working Team for Control of Pollution Caused by Electronic Information Products affiliated to Ministry of Industry and Information Technology.
This standard is under the jurisdiction of China Electronics Standardization Institute.
The bodies who are responsible for drafting this standard are China Electronics Standardization Institute and Motorola Solutions (China) Co., Ltd.
Participating drafting organizations of this standard: see Appendix A.
Chief drafting staff of this standard: Yang Meng, Han Shuoxiang, Zhang Xinjian.
This standard was issued in 2006 for the first time.
Introduction
Hazardous substances are necessary in some electrical and electronic products, including lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polychlorinated diphenyl ether due to the demand for technology and product functions. Therefore, to avoid the adverse effect of such products on the human health and environment after use and being abandoned and standardize the marking of electrical and electronic products, the standard of SJ/T 11364 - 2006 Marking for Control of Pollution Caused by Electronic Information Products is issued by the former Ministry of Information Industry after being prepared according to the relevant requirements of the document - Management Measures for Control of Pollution Caused by Electronic Information Products (Decreed No. 39 of the former Ministry of Information Industry) and relevant international standards and industrial practice as references.
However, the standard of SJ/T 11364 – 2006 is gradually not applicable with the demand of revision of Management Measures for Control of Pollution Caused by Electronic Information Products and the increasing demand of enterprises for the marking of image display and logistics process in the use of standards. This standard is therefore prepared to solve the above problems and further detail and improve requirements for marking electrical and electronic products in the aspects of environment improvement, convenience of use, national policy implementation and enterprise management cost reduction.
PROFESSIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
中華人民共和國電子行業標準
SJ/T 11364-2014
Marking for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Product
電子電氣產品有害物質限制使用標識要求
1 Scope
This standard specifies marking requirements for electrical and electronic products in terms of hazardous substances, environment-friendly use period and recovery.
This standard is applicable to electrical and electronic products sold within the territory of People's Republic of China and used by logistics process of electrical and electronic products for reference.
2 Normative Reference
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 26572 Requirements of Concentration Limits for Certain Restricted Substances in Electrical and Electronic Products
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1
Electrical and electronic product
EEP
Equipment and auxiliary products operating by way of current or magnetic field and then generating, transmitting and measuring the said current and magnetic field, with rated operating voltage not exceeding 1500V under direct current and 1000V under alternating current.
3.2
Hazardous substance
Substances contained in electrical and electronic products, including lead and its compound, mercury and its compound, cadmium and its compound, hexavalent chromium compound, polybrominated biphenyls and polychlorinated diphenyl ether.
Note: "Contained" in the above clause indicates that the content of hazardous substances exceeds limit as specified in GB/T 26572.
3.3
Environment-friendly use period
A period during which the hazardous substances in electrical and electronic products will not escape or mutate and the normal use of electrical and electronic products will not cause serious pollution or serious harm on the persons and their property.
3.4
Recovery
A process by which the waste products are treated such to meet the original service demand or use for other purposes, including recovery and use of energy.
[GB/T 20861-2007, 2.11]
3.5
Logistics
A process by which articles are delivered to the destinations, depending on the demands, including transport, storage, handling, hauling, packing, circuiting and processing, distributing and information processing which will be combined organically.
[GB/T 18354-2006, 2.2]
4 General
All the electrical and electronic products sold within the territory of People's Republic of China shall be marked with restriction of the use of hazardous substances in electrical and electronic products in accordance with this standard. The indication in the product instructions is necessary if the marking is unlikely to be directly marked on the products due to the limits of product volume, shape, surface materials or functions.
The supplier may not mark the products provided which are purchased for production, but it shall provide all the necessary information; the purchaser shall mark on the electrical and electronic products it produced and the products purchased for production shall be marked with such information.
If the marking is indicated on product instructions, the carrier may be paper instruction, optical disk (CD/DVD) or packing materials; for the product instructions for electrical and electronic products purchased for production, the Company website is another carrier. If the website is the only carrier, the instruction shall be clearly indicated with procedure to check the information.
5 Marking of Restriction of the Use of Hazardous Substances in Electrical and Electronic Products
5.1 Marking
See Figure 1 and Figure 2 for the marking of restriction of the use of hazardous substances in electrical and electronic products.
Note: The figures in Figure 2 are for example and the environment-friendly use period for electrical and electronic products shall be used in actual use.
Figure 1 Marking I Figure 2 Marking II
5.2 Marking meaning
Connotation of marking consists of hazardous substances, environment-friendly use period and recovery.
Figure 1 is green, indicating the environmental protection attribute that there are no hazardous substances in products; in the middle, the "e" means electrical, electronic and environmental, an emblem of environmental-friendly electrical and electronic products; the arrow cycles indicates that the electrical and electronic products can be recovered. The entire figure means that the products are environmental-friendly without hazardous substances and can be recovered after being discarded and shall not be discarded at will.
Figure 2 is orange, indicating the warning attribute that there are hazardous substances in products; in the middle, the alternative figure means environment-friendly use period of electrical and electronic products; the arrow cycles indicates that the electrical and electronic products can be recovered. The entire figure means that the products contains hazardous substances and may be used at ease within environment-friendly use period and shall be put into circulation system after environment-friendly use period.
5.3 Color
Marking in Figure 1 had better remain green (C: 85, M: 30, Y: 85, K: 20).
Marking in Figure 2 had better remain orange (C: 0, M: 75, Y: 100, K: 0).
5.4 Size
5.4.1 Figure size
Grid proportion in Figure 1 and Figure 2 is as shown in Figure 3 and Figure 4 (grid: 100×100). Figure 2 uses Impact and the figure height/internal diameter/external diameter of circle is 5:8:12.
Note: Impact font may be obtained in office or word processing software.
Figure 3 Marking I Figure Size
Figure 4 Marking II Figure Size
5.4.2 Marking size
The producer or importer shall select suitable marking according to size of electrical and electronic products and parts but the minimum area shall not be less than 5mm×5mm.
6 Marking Requirements
6.1 Basic requirements
6.1.1 The marking for restriction of the use of hazardous substances, which shall be clearly distinguishable, easy to see, hard to fade and to move, shall be marked on electrical and electronic products in accordance with this standard.
6.1.2 In general, marking for restriction of the use of hazardous substances shall be directly marked on the electrical and electronic products through molding, painting, pasting and printing or in accordance with the method in 6.1.3.
If the electrical and electronic products meet one of the following conditions, marking for restriction of the use of hazardous substances may not be directly marked on the surface of electrical and electronic products, but shall be marked in accordance with the method in 6.1.3 or noted in the product instructions.
a) The maximum surface area is less than 5×103mm2;
b) The shape is irregular, for example the surface area is large but the wire cables are specially long and thin;
c) The marking cannot be marked on surface of the products due to material or function of the surface.
6.1.3 The electrical and electronic products with image display function may be marked with marking for restriction of the use of hazardous substances in electrical and electronic products in digital format under the premise that the following conditions a)~f) are met at the same time;
a) The marking (in digital format) for restriction of the use of hazardous substances in electrical and electronic products need to be displayed in case of each time starting of the products. If they are displayed solely, the display time shall not be less than 2s; if they are displayed together with other information, the display time shall be duly postponed and the logo size and display position shall be adjusted to guarantee the marking are recognizable.
b) The marking (digital format) for restriction of the use of hazardous substances in electrical and electronic products may be checked by the users through user interface during operation of the products.
c) If logo in Figure 2 is chosen for marking, names and contents of hazardous substances in the products may be checked by the users through user interface, the marking format and marking requirements shall meet those specified in 6.2.2.
d) Checking procedures for marking and table mentioned in above items b) and c) shall be defined in the operating instructions of the products.
e) The marking (digital format) for restriction of the use of hazardous substances in electrical and electronic products are ex-factory settings and RO data, of which the contents are hard to modify through software.
f) The data related to marking (digital format) for restriction of the use of hazardous substances in electrical and electronic products need to be preserved by the manufacturer; if logo in Figure 1 is chosen for marking, the preservation time shall be 3a more than the product life; if logo in Figure 2 is chosen for marking, the preservation time shall be above 3a more than environment-friendly use period of the products. In case the products are damaged or cannot display normally, the manufacturer shall provide convenient and queryable data.
6.1.4 If the marking for restriction of the use of hazardous substances in electrical and electronic products are marked on the products, they normally shall be marked at a prominent location on the electrical and electronic products, such as the front of the product, side or back where function keys are located. If restricted by functions and appearance design so that it is not possible to mark the marking at prominent locations, they shall be located at other visible places easily detected by the consumers.
Foreword
Introduction
1 Scope
2 Normative Reference
3 Terms and Definitions
4 General
5 Marking of Restriction of the Use of Hazardous Substances in Electrical and Electronic Products
6 Marking Requirements
Appendix A (Normative) Name List of Participating Drafting Organizations for This Standard
9 Suggestive Description on Nature of Standard
10 Requirements, Measures and Suggestions for Implementation of this Standard
11 Suggestion on Abolishment of Relevant Existing Standards:
12 Other Events shall be Elaborated
ICS 31.020
L10
備案號：
SJ
中華人民共和國電子行業標準
SJ/T 11364－2014
代替 SJ/T 11364-2006
電子電氣產品有害物質限制使用標識要求
Marking for the restriction of the use of hazardous substances in
electrical and electronic product
2014-07-09 發布 2015-01-01 實施
中華人民共和國工業和信息化部發布
前言
本標準按照GB/T 1.1—2009給出的規則起草。
本標準自發布之日起代替并廢止SJ/T 11364－2006《電子信息產品污染控制標識要求》。
本標準與SJ/T 11364—2006相比主要變化如下：
a)標準名稱和適用范圍由SJ/T 11364—2006的“電子信息產品”調整為“電子電氣產品”，“污染控制”調整為“有害物質限制使用”；
b)增加了物流過程參照使用的說明(見第1章)；
c)刪除了規范性引用文件中的GB 18455《包裝回收標志》(見SJ/T 11364－2006的第2章)；
d)增加了有關“電子電氣產品”、“有害物質”和“物流”的術語和定義(見3.1、3.2和3.7)，刪除了SJ/T 11364－2006中有關“電子信息產品”、“有毒有害物質”、“生產者”、“進口者”和“包裝物”的術語和定義(見SJ/T 11364－2006的3.1、3.2、3.4、3.5和3.7)；
e)增加了帶有顯示功能的電子電氣產品可使用數碼格式進行標語的要求(見6.1.3)；
f)刪除了對包裝物材料名稱標識的要求(見SJ/T 11364－2006的第9章)。
請注意本文件的某些內容可能涉及專利。本文件的發布機構不承擔識別這些專利的責任。
本標準由工業和信息化部電子信息產品污染防治標準工作組提出。
本標準由中國電子技術標準化研究院歸口。
本標準由中國電子技術標準化研究院、摩托羅拉系統(中國)有限公司負責起草。
本標準參與起草單位：參見附錄A。
本標準于2006年首次發布。
引言
由于技術和產品功能的需要，目前部分電子電氣產品的材料成分中含有鉛、汞、鎘、六價鉻、多溴聯苯、多溴二苯醚等有害物質。為防止含有上述物質的產品在使用和廢棄之后給人體健康和環境帶來的不良影響，進一步規范電子電氣產品標識，根據《電子信息產品污染控制管理辦法》(原信息產業部第39號令)有關要求，參考有關國際標準和工業界實踐，原國家信息產業部發布了SJ/T 11364－2006《電子信息產品污染控制標識要求》。
隨著《電子信息產品污染控制管理辦法》修訂的需要以及企業在標準實際使用過程中對產品使用圖像顯示標識和物流過程標識的需求，SJ/T 11364－2006標準逐漸出現難以完全適用的情況。本標準制定的目的就是為了解決上述問題，從改善環境、便于應用、落實國家政策規定、降低企業管理成本的角度出發，進一步細化和完善電子電氣產品的標識要求。
電子電氣產品有害物質限制使用標識要求
1 范圍
本標準規定了電子電氣產品有害物質、環保使用期限、可否回收利用的標識要求。
本標準適用于在中華人民共和國境內銷售的電子電氣產品，亦可供電子電氣產品的物流過程參照使用。
2 規范性引用文件
下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件。僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。
GB/T 26572 電子電氣產品中有害物質的限量要求
3 術語和定義
下列術語和定義適用于本文件。
3.1
電子電氣產品 electrical and electronic product
EEP
依靠電流或電磁場工作或者以產生、傳輸和測量電流和電磁場為目的，額定工作電壓在直流電不超過1500V、交流電不超過1000V的設備及配套產品。
3.2
有害物質 hazardous substance
電子電氣產品中含有鉛及其化合物、汞及其化合物、鎘及其化合物、六價鉻化合物、多溴聯苯、多溴二苯醚。
注：其中“含有”是指有害物質的含量超出GB/T 26572規定的限量要求。
3.3
環保使用期限 environment-friendly use period
電子電氣產品中含有的有害物質不會發生外泄或突變，電子電氣產品用戶正常使用該電子電氣產品不會對環境造成嚴重污染或?qū)ζ淙松怼⒇?cái)產造成嚴重?fù)p害的期限。
3.4
回收利用 recovery
對廢棄產品進行處理，使之能夠滿足其原來的使用要求或用于其他用途的過程，包括對能量的回收和利用。
[GB/T 20861—2007，定義2.11]
3.5
物流 logistics
物品從供應地向接收地的實體流動過程。根據實際需要，將運輸、儲存、裝卸、搬運、包裝、流通加工、配送、信息處理等基本功能實施有機結合。
[GB/T 18354—2006，定義2.2]
4 總則
在中華人民共和國境內銷售的所有電子電氣產品應按本標準要求標識電子電氣產品有害物質限制使用標志。由于產品體積、形狀、表面材質或功能的限制不能在產品上標注的，應在產品說明中注明。
為生產配套而采購的電子電氣產品，供方可以對所提供的產品不進行上述標識，但應向采購方提供標識所需的全部信息；相應地，采購方應在其生產的電子電氣產品上進行標識，且標識信息范圍應包含為生產配套而采購的電子電氣產品。
其中，使用產品說明進行標注的，其載體可以是紙質說明書、說明光盤(CD/DVD)或包裝物；為生產配套而采購的電子電氣產品的產品說明除上述載體外還可以是公司網站。僅以網站為產品說明載體的，應在產品使用說明書中明確相關標識信息的查看步驟。
5 電子電氣產品有害物質限制使用標志
5.1標志
電子電氣產品有害物質限制使用標志的圖樣見圖1、圖2。
注：圖2中數字僅為示例，使用時替換為電子電氣產品相應的環保使用期限。
圖1標志I 圖2標志II
5.2 標志釋義
電子電氣產品有害物質限制使用標志的內涵包括了電子電氣產品中是否含有有害物質、電子電氣產品的環保使用期限以及電子電氣產品可否回收利用等三個部分。
圖1一般為綠色，表示其環保屬性，即產品中不含有害物質；圖形中間是一個美術體的“e”，代表了電氣(electrical)、電子(electronic)以及環境保護(environmental)，象征著綠色環保的電子電氣產品；圖形外圈帶有箭頭的線條形成一個循環的圓，表示電子電氣產品是可以回收利用的。整個圖形所表示出的含義是：該電子電氣產品不含有害物質，是綠色環保的產品，其廢棄后可以回收利用，不應隨意丟棄。
圖2一般為橙色，突出其警示屬性，即產品中含有某些有害物質；圖形中間是一個可以替換的數字，明示出電子電氣產品的環保使用期限；圖形外圈同樣由帶有箭頭的線條組成一個循環的圓，表示電子電氣產品是可以回收利用的。整個圖形所表示出的含義是：該電子電氣產品含有某些有害物質，在環保使用期限內可以放心使用，超過環保使用期限之后則應該進入回收循環系統。
5.3 顏色
圖1所示標志建議使用綠色(C：85，M：30，Y：85，K：20)。
圖2所示標志建議使用橙色(C：0，M：75，Y：100，K：0)。
5.4 規格
5.4.1 圖形規格
圖1、圖2各部分線條比例分別如圖3、圖4所示(網格數量為100×100)。其中圖2數字字體為Impact，數字高度與圓環內外直徑之比為5:8:12。
注：Impact字體的樣式可以在辦公或文字處理等軟件中得到。
圖3 標志I圖形規格
數字高度 圓環內直徑 圓環外直徑
圖4 標志II圖形規格
5.4.2 標志規格
生產者或進口者應根據電子電氣產品及部件的大小選擇適宜規格的標志，其最小面積不得小于5mm×5mm。
6 標識要求
6.1 基本要求
6.1.1 電子電氣產品應按本標準要求標識電子電氣產品有害物質限制使用標志，標志應清晰可辨、易見、不易褪色并不易去除。
6.1.2 通常情況下，電子電氣產品有害物質限制使用標志應以模塑、噴涂、粘貼、印刷的方法直接標識在電子電氣產品上，或采用6.1.3的方法進行標識。
若電子電氣產品滿足以下條件之一，可以不在產品表面直接標識電子電氣產品有害物質限制使用標志，但應采用6.1.3的方法進行標識或在產品說明中予以注明。
a)最大表面的面積小于5×103mm2；
b)形狀不規則，如表面積很大但特別細長的線纜等；
c)由于表面材質或功能的原因無法在產品表面標識。
6.1.3 帶有圖像顯示功能的電子電氣產品可在同時滿足以下a)～f)條件的前提下標識數碼格式的電子電氣產品有害物質限制使用標志；
a)在產品每次啟動時均需顯示數碼格式的電子電氣產品有害物質限制作用標志。當標志單獨顯示時，顯示時間不得少于2s；當標志與其他信息同時顯示時，應適當延長顯示時間，并調整圖像大小及顯示位置，確保標志可識別。
b)在產品運行中，用戶可以通過用戶界面查看數碼格式的電子電氣產品有害物質限制使用標志。
c)若采用圖2進行標識，用戶可以通過用戶界面查看產品中有害物質的名稱及含量，標識格式及標識要求應滿足6.2.2的規定。
d)在產品使用說明書中，應明確上述b)及c)項提及的標志及表格的查看步驟。
e)數碼各式的電子電氣產品有害物質限制使用標志為出廠設置且為只讀數據，標志內容不易通過軟件方式修改。
f)生產者需保存數碼格式的電子電氣產品有害物質限制使用標志的相關數據，若采用圖1進行標識，保存時間應超出產品壽命3a以上；若采用圖2進行標識，保存時間應超出該產品的環保使用期限3a以上。在產品損毀或者不能正常顯示的情況下，生產者需提供便利的可查詢數據。
6.1.4 若電子電氣產品有害物質限制使用標志標識在產品上，則一般應標識在電子電氣產品的正面設有功能鍵的側面及背面等易見部位。當受功能、外觀設計等影響無法在產品明顯處標識的，應標識在消費者使用產品時的其他可見部位。
6.2 有害物質標識
6.2.1 電子電氣產品應按本標準要求標識產品中是否含有有害物質：若產品中不含有害物質，應選擇圖1進行標識；若產品中含有有害物質，應選擇圖2進行標識，并應在產品說明中按6.2.2要求提供所含有害物質的名稱及含量。
6.2.2 產品中含有有害物質的電子電氣產品生產者或進口者，應按表1所示格式在產品說明中對有害物質所在部件標識有害物質的名稱及含量。
a)表1第一行為表頭，第一列為部件名稱，其他各列為有害物質在該部件中的含量，最后一行通欄用于符號含義及其他有關事項的說明。
b)若某種有害物質在該部件中不含有，即該有害物質在該部件所有均質材料中的含量均在GB/T 26572規定的限量要求以下，則該有害物質對應的含量標注為“○”；若某種有害物質在該部件中含有，即該有害物質至少在該部件的某一均質材料中的含量超出GB/T 26572規定的限量要求，則該有害物質對應的含量標注為“×”。
c)標識使用的漢字和符號應清晰可辨，其字體高度不得小于1.8mm。
表1 有害物質名稱及含量標識格式
產品中有害物質的名稱及含量
部件名稱 有害物質
鉛(Pb) 汞(Hg) 鎘(Cd) 六價鉻(Cr(VI)) 多溴聯苯(PHB) 多溴二苯醚(PBDE)
…… …… …… …… …… …… ……
本表格依據SJ/T 11364的規定編制。
○：表示該有害物質在該部件所有均質材料中的含量均在GB/T 26572規定的限量要求以下。
×：表示該有害物質至少在該部件的某一均質材料中的含量超出GB/T 26572規定的限量要求。
(企業可在此處，根據實際情況對上表中打“×”的技術原因進行進一步說明。)
6.3 環保使用期限標識
含有有害物質的電子電氣產品應由生產者或進口者參照SJ/Z 11388自行確定產品的環保使用期限[單位為(a)]，并應對環保使用期限進行標識。其中，選擇圖2進行標識的，應將標志中的數字替換為被標識產品的實際環保使用期限，并在產品說明中對保證產品在環保使用期限內的使用條件、配套件特別標識等給予詳細說明。
電子電氣產品的生產日期即為產品環保使用期限的起始日期。生產日期宜標識在產品或產品包裝上，標注格式可以采用年、年周、年月、年月日等，也可以采用產品序列號、商品條碼等包含產品生產日期信息的企業通用的產品標注方法。采用產品序列號、商品條碼等方式進行標識時，生產者或進口者應為消費者或監管部門提供必要的生產日期查詢服務。
6.4 回收利用標識
電子電氣產品生產者或進口者應使用圖1或圖2進行回收利用標識。標識電子電氣產品有害物質限制使用標志的產品表示其可以回收利用。
附錄A
(規范性附錄)
本標準參與起草單位名單
(按首字拼音順序，排名不分先后)
安捷倫科技有限公司
愛立信(中國)通信有限公司
艾默生電氣(中國)投資有限公司
愛普生(中國)有限公司
北京譜尼理化分析測試中心
北京首信諾基亞移動通訊有限公司
超威半導體(中國)有限公司
戴爾(中國)有限公司
方正科技集團股份有限公司
飛利浦(中國)投資有限公司
工業和信息化部電信研究院
工業和信息化部電子第五研究院
廣州金發科技股份有限公司
廣州有色金屬研究院
國際商業機器(IBM)中國有限公司
國家電子功能與輔助材料質量管理檢驗中心
海爾集團技術研發中心
杭州華三通信技術有限公司
華為技術有限公司
惠州市TCL電腦科技有限責任公司
佳能(中國)有限公司
江蘇省電子信息產品質量監督檢驗研究院
金山工業(集團)有限公司
京東方科技集團股份有限公司
康佳集團股份有限公司
浪潮集團有限公司
理光(中國)投資有限公司
聯想(北京)有限公司
摩托羅拉系統(中國)有限公司
尼康映像儀器銷售(中國)有限公司
清華大學材料科學與工程研究院
日電(中國)有限公司
日立(中國)有限公司上海分公司
上海貝爾股份有限公司
深圳市安姆特測試技術有限公司
深圳市華測檢測技術有限公司
松下電器(中國)有限公司
索尼(中國)有限公司
泰科電子(上海)有限公司
通標標準技術服務有限公司
通用電氣高新材料集團(中國)有限公司
廈門華僑電子企業有限公司
夏普(中國)投資有限公司
香港利盟國際(中國)有限公司
兄弟(中國)商業有限公司
雅保化工(上海)公司
英特爾(中國)有限公司
中國電子質量管理協會
中國惠普有限公司
中國家用電器協會廢舊電子電器再生利用分會
中國家用電器研究院
中國阻燃學會
中興通訊股份有限公司
參考文獻
[1]GB 5296-1999 消費品使用說明家用和類似用途電器的使用說明
[2]GB/T 18354-2006 物流術語
[3]GB/T 20861-2007 廢棄產品回收利用術語
[4]SJ/Z 11388-2009 電子信息產品環保使用期限通則
[5]《電子信息產品污染控制管理辦法》 信息產業部 2006年2月28日 第39號令
[6]《產品標識標注規定》 技術監督局 1997年11月7日 技監局監發(1997) 172號
[7] Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment EU
[8] Commission Decision of 18 August 2005, amending Directive 2002/95/EC of the European Parliament and of the council for the purpose of establishing the maximum concentration values for certain hazardous substance in electrical and electronic equipment (2005/618/EC) EU
[9] Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment EU
